A scarce collection / set of clog makers tools. This lovely old clog...
An old small hand saw. The blade is marked 'A.Ashton, Sheffield'.
An old Disston USA saw fitted with a hardwood handle.
An old Tyzack brass back tenon saw.
An old Sorby dovetail saw.MThe brass back has the markings: 'Robert...
A small, old Disston & Sons Philadelphia saw fitted with a...
An old Spear & Jackson hand saw.MThe blade has an etching with the...
This saw we suspect has only be used a couple of times. The saw has also...
An 8mm (5/16") socketed chisel marked 'Mathieson, Glasgow' fitted with an Ash shaped handle with striking pad.
Three William Marples socket chisels
A Marples sash mortice chisel with Boxwood handle and the distinctive trade mark on the handle.
A good old sash mortice chisel with Boxwood handle. Chisel we believe was made by Wm.Marples which would have had a transfer of the makers name on the blade.
Two Marples sash mortice chisels
Two William Marples mortice chisels: 6mm (1/4"), 10mm (3/8")
A super William Marples swan neck chisel fitted with a Beech handle. Width: 13mm (1/2")
An old Ward swan neck chisel fitted with a chunky Boxwood handle. Width: 13mm (1/2")
A wide two inch chisel marked 'Mawhood, Sheffield' and 'Parasole' along with a parasole / umbrella logo. Next to the logo is '1943' (World War II), there is also the Ministry arrow.
An early beech handled mortice chisel made by John Green. English circa late 18th century.
An old oval mortice chisel marked on the blade ‘3, Moseley & Simpson, Cast Steel’
An old 7/8" (22mm) socket paring chisel.
1x Isaac Greaves Chisel - 8mm 1x Buck, Edgware Road Chisel - 11mm
2 old oak handled mortice chisels. Includes: 1x Brade & Co Chisel - 4.5mm (3/16") 1x FG Pearson &Co Ld Chisel - 10mm (3/8")
1x I&H Sorby Chisel - 4.5mm (3/16") 1x Wilkinson, Sheffield England, C424,1953 (ministry arrow) Chisel - 10mm (3/8")