Volume LVIII of the Woodworker, dated 1954, published by Evans Brother....
Woodworker, volume 60, dated 1956, published by Evans Brother. Hardback...
A reprint of the S.Tyzack and Son 1908 Tool Catalogue, includes tools by...
Willcox the House for Engineers Tools and Engineering Requisites...
A History of Metallurgy by R.F. Tylecote, dated 1976.
The Design of Drill Jigs a practical manual by Andrew N.Haddow, dated...
6 volumes from the Fine Woodworking Techniques. Includes volumes: 1 , 4,...
5 small books from Burkes Help Yourself series.
An 18 inch long Marples brass top level with brass feet. The brass top is marked: 'W.Marples & Sons, Sheffield, Eng, Warranted Correct'.
18” boxwood spirit level made by J Rabone & Sons. Either side of level is marked out in inches up to 18 inch long overall. Includes over measurements. Both clear bubbles intact.
An old 6 inch brass level with a good clear bubble.
A lovely old level by Wilson Lovatt & Sons Ltd of Wolverhampton..
3 inch long brass spirit level marked ‘Vest Regn Appd for’. Length: 3”
A little 3 7/8” nickel plated brass spirit level marked ‘JR & S ltd’. Length: 98mm (3 7/8”)
A small 3 7/8” long plated spirit level marked ‘Speedtol, 1953’. Length: 98mm (3 7/8”)
A good clean engineers spirit level no.1394 made in Birmingham, England by Rabone. Length: 6”
A probably unused engineers spirit level no.1388 made in England by John Rabone & Sons. This 6 inch long level has a protective swivel cover and comes complete with the original wooden Rabone box.
A lovely, good quality old ornate 12 inch John Rabone And Sons level.
A 28” long spirit level made from Mahogany with decorative brass top and 4mm thick brass sole.
A 12 inch long hardwood spirit level with brass top and bottom.
30 inch long hardwood spirit level and plumb made by John Rabone & Sons, no.78. Comes with original Rabone box, chips to base of level.
6” boxwood spirit level made by Edward Preston & Sons, Birmm Eng. Either side of level is marked out in inches up to 6 inch long overall. Both bubbles intact.
A rosewood spirit level with brass fittings, top is 3mm thick and marked ‘Warranted Correct’.
An old decorative ebony spirit level with brass top and feet. Has cuts to brass ends (see photo).
A rare brass face spirit level that dates to the late 1800's.
A fine and rare L.L.Davis adjustable spirit level that dates to the late 1800's.