Dial vernier callipers made by Mitutoyo. Rule is marked out in inches and mille metres up to 6 inch long overall.

Digital vernier callipers made by Kennedy 331-206. Has had new battery fitted. Callipers are marked out in millimetres and inches up to 6 inch.

An old second hand pair of dividers made by Routledge. There are dents and some speckling of black staining and pitting.

Length: 249mm (9 13/16")

Two pairs of calipers includes a gear tooth vernier caliper marked H & K 8 CSE, Jaeger NR.1. Rules are marked out in centimetres vertical rule is marked out up to 9cm and the horizontal rule is marked up to 6cm. These callipers have one small patch of pitting and some minor black staining. The second caliper is a vernier caliper made by Chesterman Sheffield no. 770 and is marked out in inches and centimetres up to 8” (20cm), also marked Ver 1/50mm and Ver 1/1000 in. Nose of callipers are marked +.250 Inch.

A pair of dividers made by Wm Johnson, has a short 4mm long hairline crack to frame of dividers (see photo). These dividers measure 218mm long overall, one point is 5mm taller than the other.

Vernier calipers marked Chambon Ltd Proch Rolle Suisse, fabrique a Rolle Suisse inoxydable trempe. Rule is marked out in inches and centimetres up to 23” (60cm).

2 callipers with brass fittings. The larger callipers are marked out in millimetres to either side of rule up to 200mm long. These two tools are marked with black staining to either side of callipers, the larger callipers 3 patches of pitting.

A pair of dividers that appear to be marked Thewlis & Co Warrington. Side of tool is marked with the previous user's stamp 'M'.

Length: 188mm

A pair of dividers made by J. Dixon. This old tool has a number of dents and light pitting marks. Top of dividers is slightly burred over.

Length: 174mm (6 3/4")

A pair of navigators dividers made from brass with stainless steel point by W & HC.

Length: 182mm

A fine gear tooth vernier calliper made by Etalon Switzerland, marked rustless tempered 20C, 1/1000 inch. One section of the caliper is marked out in inches up to 4” the top rule is marked up to 3”. This fine tool comes with the original wooden box also marked Etalon Switzerland.