A fine ash handled straight edge drawknife made by Stormont, Sheffield. Retains original trade labels to handles and a good clean 10" long blade with a lot of life left.

An old beech handled coopers jigger made in Sheffield by Greaves. Has a good length clean blade, has pitting to either side.

Ash handled coopers hollowing drawknife made by Wm. Greaves & Sons, Sheaf Works. Handle has a 15mm hairline crack.

An ash handled large curved drawknife with a 14 1/2" blade. Good clean blade. Blade is marked with a faded makers name.

An ash handled drawknife with a 11" straight blade. Has a good clean blade.

Hardwood handled drawknife made by Isaac Greaves, cast steel. Blade is marked with speckling of black staining and a few minor spots of pitting. Has some staining marks to handles.

Ash handled drawknife made by Wm Marples & Sons Sheffield. Either side of blade is marked with speckling of black staining and some light pitting marks. Handles are misshapen, one handle has an old treated worm hole the other has a replacement washer.

Coopers jigger knife Marked Mathieson Glasgow Saracen Tool Works. Fitted with a beech handle that has been planed flat one side of the handle (see photo).

Beech handled drawknife made by Gilpin, Wedges Mills. Handles are marked with a number of dents. Length of blade is marked with speckling of pitting.

Beech handled straight drawknife made by Spear & Jackson. Blade reads 'S&J Spear & Jackson Sheffield' also marked with the crown mark. Blade has some speckling of mainly minor pitting.

An old beech handled drawknife made by Robert Sorby, dated 1918, cast steel. Handle has a 20mm long hairline crack, with a crack to brass ferule. Handles have been replaced with some slight movement to handles.

Ash handled drawknife made by Jos Tyzack & Son Sheffield. Good clean very slightly curved blade. One handle has some movement with a 35mm long crack to the handle. Sold as a collectable drawknife.

An old beech handled coopers drawknife made by Sorby. Blade is marked Robt Sorby Sheffield 1917. Blades marked with some minor staining, has a chip to one end of cutting edge (see photo).

An old beech handled drawknife with brass ferules made by Isaac Greaves, cast steel. Blade is marked with some minor black staining marks. Handles are faintly marked with the previous woodworker's name stamp, handles also have some denting.

An early ash handled coopers jigger knife marked Greaves & Sons Sheaf Works Electro Boraci steel. This old coopers tool measures 17" (430mm) long overall.

Beech handled drawknife with brass ferules made by W. Marples. Reverse of blade has a patch of pitting on 1/3rd of the blade.

An early drawknife made by R. Timmins & Sons. This old beech handled drawknife we believe was made in the 1800's in Birmingham. Either side of blade is marked with speckling of pitting down length of blade. A nice collectable antique tool.

A lovely old ash handled drawknife marked 'Hibernia, W. Marples & Sons, Sheffield'. Blade has some minor speckles of staining. Comes complete with a wooden sheaf.

An old drawknife with hardwood handles and a wooden sheaf. Both handles have cracks the two largest being 65mm long, see photo. This old green tool / drawknife has a good length blade.

Blade width: 285mm (11" approx)

A gents drawknife made with beech handles and fitted with brass ferules. Blade is marked with some black staining and speckling of pitting across reverse side of blade.

Ash handled drawknife made by Robert Sorby with straight blade. This drawknife has seen very little use if any.

A large drawknife made by Conelius Whitehouse, Cannock also marked with the Hedgehog brand logo. One handle has two 40mm long crack, the other has a large chip from the top of the handle and an old treated worm hole. Blade is marked with patches of pitting to front and rear has a number of mainly light pitting marks (if you would like further photos of the pitting please send us an email).