CONDITION GUIDE
N - New
F - Fine
G++ - Very Good
G+ - Good+
G - Good
G - Fr - Poor

View Full Condition Guide >>





PREVIOUSLY SOLD PLANES
Norris Planes    
Record Planes  
Stanley Planes  
Marples Tools   

Henry Taylor Carving and Turning Tools

Online catalogue > Brand New Tools >  Henry Taylor Carving and Turning Tools

Henry Taylor Carving Tools and Chisels Henry Taylor wood carving chisels and tools are available for purchase from Toolnut.co.uk. Click the link below each product to view the item on Toolnut.co.uk.

Henry Taylor Supersharp Carving Tools Ref: HT020 The Super Sharp woodcarving tool set by Henry Taylor. Ideal carving tools for delicate and detailed wood carving linoleum and wood block cutting. Each individual carver made with beech handles, brass ferule and a polished and sharpened blade. The set includes 1 of each: Bent chisel 5/16” (8mm), Bent shallow gouge 5/16” (8mm), Bent skew chisel 3/8” (10mm), Straight chisel 3/8” (10mm), Straight deep gouge 1/8” (3mm), Bent V 1/8” (3mm). Tool Manufacturer: Henry Taylor BUY FROM TOOLNUT.CO.UK  in stock. OUT OF STOCK

Henry Taylor Woodcarving 6 Piece Starter Set Ref: HT027 A 6 piece woodcarving tool set from Henry Taylor’s Amateur range Made with hardwood beech handles, brass ferules and a ground and sharpened blade ready for use. This woodworking set comes displayed in a box with a useful booklet for newcomers and a slip stone for re-sharpening your tools, making this item an ideal gift set. Contains 1 each of: 3/8in (10mm) Skew Chisel, 3/16in (5mm) Straight Gouge, 3/8in (10mm) Straight Gouge, 5/16in (8mm) Bent Gouge, 1/4in (6mm) Spoon Bit Chisel, 1/4in (6mm) Straight ' V ' Tool. Blade length. 3. 1/2in. Tool Manufacturer: Henry Taylor BUY FROM TOOLNUT.CO.UK  in stock. OUT OF STOCK

Henry Taylor Professional Carving Chisels (6 piece) Ref: HT026 A 6 piece set of professional carving tools by Henry Taylor (Acorn Brand). Built with hardwood beech handles, brass ferules with ground and sharpened blades. Set Contains 1 of each:- 1/2" square chisel, 5/16" straight gouge 3/8" straight gouge 1/4" straight gouge 1/32" straight gouge 1/4" Parting tool Blade lengths between 4" - 5" long. Tool Manufacturer: Henry Taylor BUY FROM TOOLNUT.CO.UK  in stock. OUT OF STOCK

Henry Taylor Carving Tools Make Up Set 1 Ref: HT025 A 3 piece beginners wood carving tool set from the Acorn Brand by Henry Taylor. Made with hardwood beech handles, brass ferules and a ground and sharpened blade ready for use. The woodcarving set comes displayed in a box. Contains 1 each of: 3/8in (10mm) Straight Gouge, 1/4in (6mm) Spoon Bit Chisel, 1/4in (6mm) Straight ' V ' Tool. Blade length. 3 1/4inch - 3 1/2 inch.. Tool Manufacturer: Henry Taylor BUY FROM TOOLNUT.CO.UK  in stock. OUT OF STOCK

Henry Taylor 5 Piece Starters Carving Set Ref: HT024 Boxed 5 piece starter set of carving tools by Henry Taylor with beech hexagonal handles, blades honed and sharpened. This starters carvers set contains: 6mm flat chisel, 6mm shallow gouge, 8mm medium gouge, 6mm medium gouge, 8mm steep-cut gouge Blade Length: 3 1/4 inch - 3 1/2 inch The beginners carving set also includes an 11 page project instructions leaflet by Jeremy Williams. Tool Manufacturer: Henry Taylor BUY FROM TOOLNUT.CO.UK  in stock. OUT OF STOCK

Henry Taylor Straight Adze 2 Inch Ref: HTSAZ The Henry Taylor straight cutting adze is designed for single handed use, ideal for roughing out on large carvings. This Henry Taylor tool removes wood at an extremely fast rate. This adze has been developed after much research into the many traditional styles available. Handle Length: 10 1/2" (270mm) Blade Width: 2" (51mm) Tool Manufacturer: Henry Taylor BUY FROM TOOLNUT.CO.UK  in stock. OUT OF STOCK

Henry Taylor Adze - Gouge Ref: HTGOA The Henry Taylor gouge cutting adze is designed for single handed use, ideal for roughing out on large carvings. This Henry Taylor tool removes wood at an extremely fast rate. This adze has been developed after much research into the many traditional styles available. Handle Length: 10 1/2" (270mm) Blade Width: 2" (51mm) Tool Manufacturer: Henry Taylor BUY FROM TOOLNUT.CO.UK  in stock. OUT OF STOCK

Henry Taylor Turning Tools and chisels Henry Taylor Turning Tools and chisels are available for purchase from Toolnut.co.uk. Click the link below each product to view the item on Toolnut.co.uk.

Henry Taylor HSS 5 Piece Turning Tool Set Ref: HT030 A 5 piece professional full size turning tool set by Henry Taylor Made from dark stained beech handles with brass ferules and high speed steel (HSS) blades. Each tool is carefully forged, correctly hardened and tempered, then hardness-tested to guarantee edge retention. Set comprises 1 each of:- 3/4in Deep Fluting Gouge, 3/8in Spindle Gouge, 1/2in Standard Parting Tool, 3/4in Round nose Scraper, 3/4in Oval Skew Chisel. A lovely wood turning tool set supplied in a sturdy presentation box. Tool Manufacturer: Henry Taylor BUY FROM TOOLNUT.CO.UK  in stock. OUT OF STOCK

Henry Taylor HSS 3 Piece Turning Tool Set Ref: HT029 A 3 piece professional full size turning tool set by Henry Taylor. Made from dark stained beech handles with brass ferules and high speed steel (HSS) blades. Each tool is carefully forged, correctly hardened and tempered, then hardness-tested to guarantee edge retention. Set comprises 1 each of:- 1/2in Spindle Gouge, 1/2in Skew End Turning Chisel, 1/2in Standard Parting Tool. A lovely wood turning tool set supplied in a sturdy presentation box. BUY FROM TOOLNUT.CO.UK Tool Manufacturer: Henry Taylor  in stock. OUT OF STOCK

Henry Taylor HSS 8 Piece Turning Tool Set Ref: HT031 An 8 piece professional full size turning tool set by Henry Taylor Made from dark stained beech handles with brass ferules and high speed steel (HSS) blades. Each tool is carefully forged, correctly hardened and tempered, then hardness-tested to guarantee edge retention. Set comprises 1 each of:- 3/4in Deep Fluting Gouge, 1/4in Turning Gouge, 1/2in Turning Gouge, 3/4in Skew End Turning Chisel, 1in Round Nose Scraper, 3/4in Square End Turning Scraper, 3/4in Parting Tool, 1/4in Long and strong deep fluting gouge. A lovely wood turning tool set supplied in a sturdy presentation box. Tool Manufacturer: Henry Taylor BUY FROM TOOLNUT.CO.UK  in stock. OUT OF STOCK

Henry Taylor Turning Tools Set 5 Piece (loose) Ref: HT5LS Set of 5 Henry Taylor turning tools, made from dark stained beech handles with brass ferules and high speed steel (HSS) blades. Each tool is carefully forged, correctly hardened and tempered, then hardness-tested to guarantee edge retention. Set comprises 1 each of:- 4mm Spindle Gouge, 6mm Spindle Gouge, 9mm Spindle Gouge, 13mm Skew Chisel, 13mm Parting Tool. Blade Lengths: 4 1/4" – 4 1/2" Overall Length: 11 1/4" – 11 3/4" Tool Manufacturer: Henry Taylor BUY FROM TOOLNUT.CO.UK  in stock. OUT OF STOCK

Henry Taylor Oval Skew Chisel Ref: HTOSC A HSS Henry Taylor oval skew chisel. This turning chisel has accurate handling, is sensitive, is stable on the rest and is less susceptible to 'dig-ins'. Available Sizes:- 13mm (1/2"), 19mm (3/4"), 25mm (1") Handle Length: 9 1/2" Tool Manufacturer: Henry Taylor BUY FROM TOOLNUT.CO.UK  in stock. OUT OF STOCK

Henry Taylor Round Bar Skew Chisel Ref: HTRSK A HSS Henry Taylor round bar skew chisel. This turning tool allows the blade to move freely along the tool rest. Available Sizes:- 13mm (1/2") Handle Length: 11 1/2" Tool Manufacturer: Henry Taylor BUY FROM TOOLNUT.CO.UK  in stock. OUT OF STOCK

Henry Taylor Skew Chisel Ref: HTSKW A HSS Henry Taylor skew end chisel. This turning tool is less prone to vibration. This tool is heavier and stronger than most other skew chisels. Available Sizes:- 6mm (1/4"), 13mm (1/2"), 19mm (3/4"), 25mm (1") Handle Length: 7" - 9 1/2" Tool Manufacturer: Henry Taylor BUY FROM TOOLNUT.CO.UK  in stock. OUT OF STOCK

Henry Taylor Beading and Parting Tool Ref: HTBPT A HSS Henry Taylor beading and parting tool. This turning tool is used for cleaning up or rounding off the end of cylinders, forming short straight sections, forming beads, cutting straight bottom notches, turning spigots and for vee cuts. Available Sizes:- 6mm (1/4"), 10mm (3/8") Handle Length: 7" - 9 1/2" Tool Manufacturer: Henry Taylor BUY FROM TOOLNUT.CO.UK  in stock. OUT OF STOCK

Henry Taylor Diamond Parting Tool Ref: HTDDPT A HSS Henry Taylor diamond parting tool. This turning tool is used for separating finished work from the waste and cutting deep grooves. Available Sizes:- 19mm x 3mm (3/4" x 1/8") Handle Length: 9 1/2" Tool Manufacturer: Henry Taylor BUY FROM TOOLNUT.CO.UK  in stock. OUT OF STOCK

Henry Taylor Parting Tool Ref: HS13 A HSS Henry Taylor diamond parting tool. This turning tool is used for separating finished work from the waste and cutting deep grooves. Available Sizes:- 19mm x 3mm (3/4" x 1/8") Tool Manufacturer: Henry Taylor BUY FROM TOOLNUT.CO.UK  in stock. OUT OF STOCK

Henry Taylor Diamond Point Scraper Ref: HTDDPS A HSS Henry Taylor diamond point scraper. This turning tool is used for incised line decoration. Available Sizes:- 19mm (3/4 inch), 25mm (1 inch) Tool Manufacturer: Henry Taylor BUY FROM TOOLNUT.CO.UK  in stock. OUT OF STOCK

Henry Taylor Diamond Side Cutting Scraper Ref: HTDDS A HSS Henry Taylor diamond point scraper. This turning tool is used to hollow and finish the side and the bottom holes, such as the inside of a turned container. Available Sizes:- 19mm (3/4 inch) Tool Manufacturer: Henry Taylor BUY FROM TOOLNUT.CO.UK  in stock. OUT OF STOCK

Henry Taylor Round Side Cutting Scraper Ref: HTSCS A HSS Henry Taylor round side cutting scraper. This turning tool is used for finishing egg cups, goblets and the inside of bowls. Available Sizes:- 19mm (3/4 inch) Tool Manufacturer: Henry Taylor BUY FROM TOOLNUT.CO.UK  in stock. OUT OF STOCK

Henry Taylor Round Nose Scraper Ref: HTRNS A HSS Henry Taylor round nose scraper. This turning tool is used to hollow and finish concave surfaces such as inside bowls and goblets. Available Sizes:- 19mm (3/4 inch), 25mm (1 inch) Tool Manufacturer: Henry Taylor BUY FROM TOOLNUT.CO.UK  in stock. OUT OF STOCK

Henry Taylor Superflute Gouge Ref: HTFLG A HSS Henry Taylor superflute gouge. This turning tool is used for small bowls on very delicate cuts. Available Sizes:- 6mm (1/4 inch), 10mm (3/8 inch), 16mm (5/8 inch) Tool Manufacturer: Henry Taylor BUY FROM TOOLNUT.CO.UK  in stock. OUT OF STOCK

Henry Taylor Forged Spindle Gouge Ref: HTSPG A HSS Henry Taylor forged spindle gouge. This turning tool is used for detailed shaping between centres especially for concave curves. Available Sizes:- 13mm (1/2 inch), 25mm (1 inch) Handle Length: 9 1/2" Tool Manufacturer: Henry Taylor BUY FROM TOOLNUT.CO.UK  in stock. OUT OF STOCK

Henry Taylor Forged Roughing out Gouge Ref: HTROG A HSS Henry Taylor forged roughing out gouge. This turning tool is used between centres to take the corners off and shape shallow curves. Available Sizes:- 19mm (3/4 inch), 25mm (1 inch) Handle Length: 11 1/2" - 16" Tool Manufacturer: Henry Taylor BUY FROM TOOLNUT.CO.UK  in stock. OUT OF STOCK

Online catalogue > Brand New Tools >  Henry Taylor Carving and Turning Tools