3 old mortice chisels made by Marples, includes:
1 x 14mm chisel,
1 x 9mm has a 70mm long crack to handle and a large chip 35 x 20mm to striking end of handle.
1 x 7mm, has a 60mm long crack to handle,

2 Marples Sash Mortice Chisels
2 boxwood handled sash mortice chisels made by Marples. Includes:
1 x 13mm chisel, 1 x 6mm chisel (has 2 minor patches of pitting to top side of blade).

Both handles have marks and dents through use. These Marples chisels measure from 316mm up to 320mm.

5 ash handled registered chisels made by Marples, includes:
1 x 25mm, 1x 19mm, 1 x 13mm, 1 x 12mm and 1 x 7mm.

2 old mortice chisels made by Sorby. Includes:
1 x 11mm I & H Sorby chisel, handle has around half a dozen old treated worm holes and two 50mm long hairline cracks to striking end,
1 x 10mm I. Sorby chisel, blade is marked with speckling of pitting with a heavy patch at tip of blade.

These collectable chisels measure from 305mm up to 342mm long overall.

2 hardwood handled sash mortice chisels made by Sorby. Includes:
1 x 12mm chisel by I. Sorby, has crack to brass ferule, two 35mm long cracks to striking end of handle. Blades marked with light speckling of pitting and staining.
1 x 7mm chisel by Robert Sorby.

2 boxwood handled sash mortice chisels made by I. Sorby. Includes:
1 x 10mm chisel, has replacement handle which has a 2mm gap between the blade shoulder and handle, plus slight splitting out to striking end of handle and a 20mm long crack.
1 x 9mm chisel, has a large 75mm long crack to handle.

These collectable chisels measure from 330mm up to 342mm long overall.

4 woodworking chisels made by Ward, includes:
1 x 28mm registered chisel, ash handle, has minor speckles of pitting/ staining
1 x 25mm registered chisel, ash handle,
1 x 12mm chisel with boxwood handle, has small patch of pitting at tip of blade.
1 x 10mm chisel with boxwood handle.

Two old mortice chisels that are faintly marked Moseley & Simpson Cast Steel. Includes:
1 x 13mm mortice chisel,
1 x 12mm mortice chisel.
Both woodworking chisels are marked with some black staining and pitting to the blades, handles are marked with the previous users name stamp. These old tools measure 325mm long overall.

Collection of 4 registered chisels and 1 registered firmer gouge, includes:
1 x 36mm in-cannel firmer gouge, handles marked John Bull.
1 x 25mm chisel by Woodcock, striking ferule has burring,
1 x 19mm colonel chisel, has some speckling of paint to handle,
1 x 13mm chisel by Toga,
1 x 6mm chisel.

Two boxwood handled mortise chisels made by Ward, both marked W.P. Includes:
1 x 15mm wide mortise chisel, blade is marked with a patch of pitting (see photo), has some marks and dents to the boxwood handle.
1 x 10mm wide mortise chisel, blade is marked with some minor speckling of pitting to one side and minor staining. Handle has a number of dents and 2 cracks one 55mm long the other 20mm long.

Two old mortice chisels, includes:
1 x 12mm wide mortice chisel by Moulson Brothers. We believe this chisel dates from the early 1800's to the late 1800's. Has a number of dents, scratches and pitting marks to blade.
1 x 4mm wide chisel by Turner, we believe this chisel dates from around the 1770's. Marked with some pitting to blade.

These old antique woodworking chisels measure from 284mm up to 286mm long overall.

Two old antique mortice chisels made by Iohn Green, includes:
1 x 8mm wide chisel with oak handle, has four 25mm long cracks to handle.
1 x 7mm wide mortice chisel with oak handle, has two large pieces missing from striking end of handle.
We believe these woodworking chisels date from around 1770's to early 1800's, two good collectable tools.

2 beech handled mortice chisels, includes:
1 x 10mm chisels made by Ward. Blade is marked with pitting mainly to side of blade.
1 x 3mm chisel by E. Morrison & Son Sheffield. Length of blade is marked with mainly light pitting and black staining.

3 old mortice chisels, includes
1 x 11mm, has two 45mm long cracks to handle plus previous woodworkers name stamps, blade is marked with speckling of black staining and minor pitting,
1 x 10mm wide chisel made by Hildick, handle has 30mm x 30mm chip to striking end.
1 x length of blade is marked with speckling of pitting,
1 x 3.5mm, has a short length blade, handle has two 40mm long cracks,

4 registered chisels made by A. Hildick with mainly ash handles and one beech handle. Includes:
1 x 25mm, dated 1915, has some minor speckling of pitting,
1 x 19mm, marked G.P.O 1962, striking ferule has burred over slightly, handle is marked with speckling of white paint.
1 x 12mm,
1 x 7mm.

A large beech handled swan neck chisel made by Thos Ibbotson. Has pitting marks mainly to sides of blade.

An old mortice chisel made by I & H Sorby. Handle is marked with the previous woodworkers name stamps otherwise a good clean handle.

Blade width: 18mm
Overall length: 339mm

A collection of 5 heavy duty mortice chisels with beech handles, collection includes:
1 x 26mm
1 x 18mm
1 x 17mm
1 x 10mm
1 x 7mm wide mortice chisel.

Two old mortice chisels made by Ward, includes:
1 x 5mm wide chisel, marked with some staining and minor pitting to blade, some marks to handle through use.
1 x 3mm wide mortice chisel, marked with previous woodworkers name stamps to handle.
These old mortice chisels measure 245mm and 298mm (11 3/4") long overall.

Collection of 3 mortice chisels, collection includes:
1 x 13mm wide chisel by F. G. Pearson & Co, Sheffield, 1918, also marked with the ministry arrow.
1 x 11.5mm wide mortice chisel with oak handle.
1 x 6mm wide mortice chisel made by J. Howarth.

Two old mortice chisels made by T. Turner, includes:
1 x 6mm wide ash handled mortice chisel, blade is marked with some patches of pitting.
1 x 5mm wide beech handled mortice chisel, blade is marked with some minor pitting marks.
Both old woodworking mortice chisels are marked with the previous users name stamp.