A sliding calliper with a surface and height gauge that comes complete with the original wooden box. Rule is marked out in mille metres and inches to reverse side up to 10 inches long.

Collection of 3 micrometers and 1 depth gauge, includes:
1 x Starrett no. 448 Depth Gauge,
1 x Chesterman Sheffield micrometer no. 2900, includes case, case lacks locking latch,
1 x Brown & Sharp micrometer, PAT 1,629,406,
1 x Central Tool Co. USA micrometer, overall length: 270mm (10 5/8”).

A boxed set of weights for weighing precious metals such as gold. Includes 15 weights from 100 grams down to 0.02 of a gram. This set of weights come in a fitted wooden box also includes tweezers for the smaller weights.

A small set of brass postal scales with a hardwood base. Scales are marked made in England Warranted accurate. Includes 5 brass weights: 8oz, 4oz, 2oz, 1oz and 1/2oz. Rectangular holding plate measures 90mm by 76mm.

A small set of brass scales with a hardwood base. Scales are marked made in England Warranted accurate. Includes 6 brass weights: 8oz, 4oz, 2oz, 1oz, 1/2oz and 1/2oz. Rectangular holding plate measures 95mm by 76mm.

Depth gauge made by Starrett marked The L.S. Starrett Co Ltd, Great Britain no. 440. Includes 5 rods and comes in the original Starrett mahogany box.

Also included are some extra Starrett parts, which are possibly parts for a different Starrett tool as the rods are very slightly thicker, reflected in price.

Collection of eight wooden templates.

Speed indicator marked The L.S. Starrett Co. Athol Mass USA.

Speed indicator marked The L.S. Starrett Co. Athol Mass USA.

Two screw plates marked A. Mathieson & Son. These old tools have some pitting mainly on the larger tool. The smaller screw plate measures 245mm (9 5/8”) long and the larger screw plate measures 303mm (11 7/8”).

Three old screw plates, includes two boxwood handled screw plates with brass tops and ferules both marked RL along with the ministry arrow and measure 194mm long overall and the 145mm long overall. The unhandled screw plate is marked 9BA this little tool measures 76mm long overall.

A pair of beech gothic templates single and double, both of which are marked A.Mathieson & Son Glasgow & Edinburgh. There’s also a square template that is unmarked but we also believe this to be made by the same maker Alex Mathieson.

Collection of four beech templates two of which are marked Joseph King Maker.

Collection of 5 drill and wire gauges, includes:
1 x I & H Sorby wire gauge with oak handle,
1 x 'Steinman pin & twist drill sizes, kirschiner wires',
1 x 60 hole Starrett drill and wire
1 x 26 hole plate unnamed,
1 x 12 hole small gunmetal plate.

Collection of 7 measuring tools, collection includes:
1 x Japanese try and mitre square, 1 x dovetail marker probably, 1 x Rabone wooden folding rule no. 1167,
1 x Fisher & Co steel rule no.16E, 1 x stainless steel rule, 1 x sliding bevel with a cast iron frame, 1 x mitre square made from rosewood.

4 wire gauges, includes:
1 x Moore & Wright gauge 'no. 1058, imperial standard wire gauge'. (largest gauge),
1 x circular wire gauge made by Roebuck 'Imperial standard wire gauge,
1 x 4 hole unnamed wire gauge,
1 x 36 hole unnamed wire gauge (smallest gauge).

A 20 inch vernier height gauge no. 369 made by Chesterman. This tool has a large solid base which helps to stop tilting due to its forward position. This height gauge is in excellent condition complete with accessories and the original wooden case.