A fine 1/2" dado plane no. 39 made by Stanley. This dado plane is fitted with a near full length skew cutter, 2 spurs and adjustable depth stop. The adjuster knobs have little of the original finish and are marked with light pitting. Body retains an estimated 95%+ of its black japanning, retains the original machine marks with a good clean sole. A great collectable plane.

Nickel plated side rabbet plane no. 99 made in USA by Stanley with rosewood knob. Retains a near full length cutter marked Stanley Made in USA. Body maintains an estimated 70% of nickel plating. Comes complete with depth stop.

Adjustable bullnose plane made by Edward Preston. Retains a good length blade marked 'Preston EP Birmm Eng Patent. All parts are marked with the same cast number '15'. Blade is marked with speckling of black staining. Body of plane has speckling of mainly light pitting across sides and sole.

No.077A bullnose plane made in England by Record. Retains a good length Record tungsten steel cutting iron. Comes complete with detachable nose piece and two shims.

Bullnose plane and spokeshave made by Stanley. Includes:
1 x no. 75 bullnose planewith a Stanley USA cutter. Retains 70% of its finish.
1 x no. 151 adjustable flat bottom spokeshave, cutter is marked Stanley SW, made in USA (marked with sweetheart logo). Retains 70% of finish.

A little nickel plated side rabbet plane no. 79 made in England by Stanley. Retains two Stanley cutters, (cutter require re-grinding). This woodworking plane lacks its side fence. Body maintains an estimated 85% of its nickel plating, main loss to front of plane.

Stanley no. 90 bullnose rebate plane. Retains a near full length Stanley blade. Body maintains an estimated 85% of its nickel plating. Body is marked with a small number dents through use.

A British made Stanley no. 90J bullnose woodworking plane. Retains a near full length Stanley cutting iron. Body retains an estimate 85% of its finish. Outer body is marked with some light speckling of pitting.

Side rabbet woodworking plane no. 79 made in England by Stanley. This rabbet plane has retains two near full length Stanley cutters. Lacks the side fence, body retains an estimated 95% of its nickel plating, loss of nickel is to the front of the plane as can be seen in the photo.

An early nickel plated side rebate plane no. 79 made in USA by Stanley. This woodworking plane maintains two near full length Stanley cutters marked Stanley SW made in USA (sweetheart logo) and retains an estimated 45% of its nickel plating main loss to rear of plane. Due to loss of finish the plane is classed as condition G.

A little nickel plated side rabbet plane no. 79 made in England by Stanley. Retains two near full length Stanley cutters. Lacks depth stop. Body maintains an estimated 96-98% of its nickel plating and comes with the original Stanley box.

An early nickel plated side rebate plane no. 79 made in USA by Stanley. This woodworking plane maintains two near full length Stanley USA cutters, some light staining to cutters, body of woodworking plane retains an estimated 98% of its nickel plating. A fine old Stanley side rebate plane no. 79.

Shoulder plane no. 92 made by Stanley, retains a good length Stanley cutting iron. Body of plane maintains an estimated 85% of its nickel plating, has some nicks and dents to body.

A fine tongue and groove plane no. 41 made by Union with rosewood knob. Body maintains an estimated 90% of its nickel plating. A good old example of the Union T&G plane.

Tongue and groove plane no. 41 made by Union with rosewood knob. Body maintains an estimated 90%+ of its nickel plating. Retains two good length cutters that measure 8mm wide.

Nickel plated side rebate plane no. 79 made in England by Stanley. This little rebate plane has maintains two full length Stanley cutters and 98% of its nickel, lacks depth fence.

Shoulder plane no. 92 made by Stanley, retains a near good length Stanley cutting iron. Body maintains an estimated 96-98% of its nickel plating, body is also marked with the number 4 in four separate places.

A fine nickel plated side rabbet plane no. 79 made in England by Stanley. This woodworking plane has seen only light use still maintaining two good length Stanley cutters, 98% of its nickel plating and comes with a user made box. A fine old Stanley side rebate plane no. 79.

A fine rebate plane no. 078 made by Record. Retains Record tungsten steel cutter that has 12mm of blade left. Body maintains an estimated 95% of its japanning. This no. 078 rebate plane retains the original machine markings and comes complete with the side fence, spur, depth stop.

Rabbet plane no. 778 made by Record. Retains a good length Record cutter. Comes with side fence and depth stop, lacks spur. This woodworking rabbet plane maintains an estimated 85% of its japanning, body is marked with orange paint. Good clean sole.

A fine nickel plated side rebate plane no. 79 made in England by Stanley. This woodworking plane has seen very little use still maintaining two full length Stanley cutters, 98% of its nickel plating and comes with the original Stanley box (has some marks to lid of box). A fine old Stanley side rebate plane no. 79.

Shoulder rabbet plane no 073 made by Record. Retains a good length Record tungsten steel cutting iron. A fine old woodworking plane, has a small number of minor dents to sole.

Beech handled carriage makers rebate plane no. 010, made by Record. Retains a good length Record tungsten steel cutter, best crucible cast. Body appears to have been re-sprayed in places by the previous woodworker. Outer body is marked with some minor black staining and some minor speckling of pitting mainly to sides of plane. This Record woodworking plane retains the original Record trade sticker to rear handle and has a good smooth sole.

Rebate plane no. 0182 made by Ohio Tool Co. Retains a good length cutter, lacks depth stop. Body maintains an estimated 65% of its japanning. Body is marked with some denting and light pitting/ staining.

A fine little shoulder rabbet plane no. 041 made in England by Record. Retains a near full length Record tungsten steel cutting iron. This lovely little woodworking plane has seen very little use still maintaining an estimated 97% of its nickel plating plus part of the original Record trade label.

A fine nickel plated no.077A bullnose plane made in England by Record. Retains a good length Record tungsten steel cutting iron. Comes complete with detachable nose piece, two shims. A fine plane that retains an estimated 99% of its nickel plating.

A nickel plated cabinet makers shoulder rabbet plane no. 93 made in England by Stanley. This old woodworking planes retains a near full length Stanley blade. Body maintains an estimated 97% of its nickel plating.

Stanley No. 79 Side Rebate PlaneA fine nickel plated side rebate plane no. 79 made in England by Stanley. This woodworking plane has 2 good length Stanley cutters (one cutter requires grinding as has a chip to the point of the cutter), 98% of its nickel plated and comes with the original Stanley box. A fine old Stanley side rebate plane no. 79.

A fine Stanley England carriage makers rabbet plane no. 10 1/2. This old woodworking planes has beech handles that have some slight loss and cracking to the lacquer. Sides and sole of plane retain the original machine markings. Retains a near length Stanley cutter. A fine carriage makers rabbet plane no. 10 1/2 that still retains an estimated 98% of its finish.

A fine bullnose plane no. 90J made in England by Stanley. Retains a good length Stanley blade. This bullnose plane maintains the original machine marks, has some minor speckles of black staining, retains 99% of its original finish and the original Stanley box.

Beech handled carriage makers rebate plane no. 010 made by Record. Retains a Record tungsten steel cutter, best crucible cast. Handles have some loss of lacquer. Face plate has some very slight loss of nickel plating. Body retains an estimated 75% of japanning. Outer body is marked with a small patch of minor pitting, minor dents and some light scratching.

Beech handled carriage makers rabbet plane no. 010, made by Record. Retains a good length Record tungsten steel best crucible cast cutter. Handles retain little of the original lacquer. Body retains an estimated 80% of its japanning. Outer body is marked with some minor speckling of pitting and light scratching.

A no. 90 bullnose rebate plane made in England by Stanley. Retains a near full length Stanley cutting iron. Body maintains an estimated 97% of its nickel plating. This woodworking plane has seen very little use if any and comes complete with the Stanley box (box lacks Stanley label).

Rebate plane no. 078 made by Record. Retains a near full length Record tungsten cutter. Body maintains an estimated 90-95% of its japanning. This Record rebate plane maintains the original machine markings. Body is marked with some minor staining. Comes complete with the side fence, spur and depth stop.

Shoulder rabbet plane no. 042 made by Record. Cutters marked Record tungsten steel, has very little cutter left. Body is marked with some black staining. Has a very very minor chip to mouth.

Rabbet plane no. 778 made by Record. Retains a short length Record cutter. This woodworking plane comes with a side fence, depth stop and spur. Body maintains an estimated 85% of its japanning. Mouth of the plane has a small chip (see photo).

A fine scarce nickel plated side rabbet plane no. 1369 marked Preston EP Patent. Retains original good length cutters marked E.Preston & Sons Birm Eng Patent. This fine old Preston side rabbet plane is in excellent condition and still retains 98% of its nickel plating.

A fine side rabbet plane no.2506s made in England by Record. Retains two near full length Record tungsten steel cutters. Beech knob has some very slight loss and some cracking of the lacquer. This old woodworking plane has seen little use still maintaining 98% of its nickel plating, the original Record label and the original fence.

Beech handled carriage makers rabbet plane no. 10, made in England by Stanley. Retains a near full length Stanley cutter. Body maintains an estimated 96-98% of its japanning. Handles have some loss of lacquer mainly to front knob. Outer body retains the original machines marks with a good clean sole.

A little used duplex, rabbet and fillester plane no. 78 made in England by Stanley, retains a full length Stanley cutter. This old woodworking plane comes complete with the side fence, spur and depth stop. Body maintains an estimated 99% of its japanning along with part of the original Stanley box and leaflet.

A no. 311 shoulder and chisel plane made by Record. Retains a good length Record tungsten steel cutter. This 311 second hand woodworking plane is in excellent condition with much of the original machine marks and the Record trade label. Lacks the bullnose attachment.

A fine little used 5/8” dado plane no. 39 made by Stanley. This dado plane is fitted with a full length skew cutter, 2 spurs and adjustable depth stop. Adjuster knob is marked Stanley SW (with sweetheart logo) made in USA. The adjuster knobs have some slight loss of finish. This Stanley dado plane no. 39 has seen very little use, cutter appears unused. Body retains an estimated 99% of its black japanning, retains the original machine marks with a good clean sole. A great collectable plane hard to find in this condition.

A fine little used 7/8” dado plane no. 39 made by Stanley. This dado plane is fitted with a full length skew cutter, adjustable depth stop and 2 spurs. Adjuster knob is marked Stanley SW made in USA with sweetheart logo. This is a fine plane that has seen very little use, cutter appears unused. Body retains an estimated 99% of its black japanning. Outer body has some very very minor speckles of staining, retains the original machine marks with a good clean smooth sole. A great collectable plane hard to find in this condition.

Bullnose plane no. 077A made in England by Record. Retains a good length Record tungsten steel cutting iron. Has two very minor chips to either corner of the mouth. Body maintains an estimated 80-85% of its nickel plating. Comes complete with detachable nose piece and two shims.

A fine little used nickel plated side rabbet plane no. 79 made in England by Stanley. This woodworking plane has seen very little use if any still maintaining two full length Stanley cutters, 99% of its nickel plated and comes with the original Stanley box and wax paper.