An ebony handled gun stokers screwdriver made by G & J.W. Hawksley. Handle has a large chip 35mm by 5mm.

Beech handled turnscrew with brass ferule made by W. H. Clay, Sheffield.

2 old screw drivers, includes:
1 x boxwood handled screwdriver, has a number of marks and dents. Overall length: 518mm
1 x F. G. Pearson & Co, Sheffield screwdriver with beech handle. Handle is marked with a number of dents, with a large amount of bruising to top of handle where it has been struck with a hammer. Overall length: 305mm.

2 old turnscrews, includes:
1 x Mathieson turncrew with replacement mahogany handle, measures 397mm long overall. Length of blade is marked with speckling of pitting.
1 x W. Clay, Sheffield turnscrew with beech handle dated 1940 also marked with the ministry arrow. Measures 298mm long overall.

2 beech handled turnscrews, includes:
1 x Tyzack, Sheffield turncrew, 256mm long overall.
1 x unnamed turnscrew 206mm long overall.

An old ash handled screwdriver with a nice feel. Handle is marked with the previous users name stamp.

An old beech handled turnscrew made by Henry Pasley, Sheffield. Handle has been re-lacquered by previous user. Blade is marked with some denting and black staining marks.

3 flat head ratchet screwdrivers, includes:
1 x hardwood handled screwdriver made by Guys.
1 x plastic handled guys screwdriver.
1 x plastic handled Stanley screwdriver.

Beech handled turnscrew marked Alfrid 1963 G.P.O. Blade is marked with black staining, handle is marked with the previous woodworkers name stamp.

Overall length: 483mm (19")

2 ratchet screwdrivers. Includes:
1 x ratchet screwdriver made by Guys, length: 285mm (11 1/4")
1 x ratchet screwdriver made by Stanley, has a small good replacement screw, length: 270mm (10 5/8").

Beech handle screwdriver with brass ferule made by Hale Bros. Blade is marked with some pitting close to ferule.

Overall length: 279mm (11")

Collection of 3 octagonal handled screwdrivers, collection includes
1 x boxwood handled screwdriver, 322mm (12 5/8”) long.
1 x boxwood handled screwdriver by W.Marples & Sons, has speckling ob black staining to blade, handle has been well used with a number of dents, 244mm (9 1/2") long overall,
1 x rosewood handled screwdriver, 188mm (7 7/16”) long overall.

Beech handled turnscrew marked to blade W. Marples & Sons Sheffield Eng (clover leaf logo). Handle has some denting.

Beech handled turnscrew marked Toga W.

Collection of 5 old brass screwdrivers. These little screwdrivers measure on average 120mm long overall. Steel blades are marked with some speckling of black staining.

Collection of 5 screwdrivers made by Stanley, includes 4 flat heads and 1 cross head. Handles retain little of the original finish. These screwdrivers measure from 154mm up to 330mm long overall. A few blades are marked with speckling of black staining, the longer screwdriver is marked with a number of pitting marks.

3 boxwood handled screwdrivers made by Wm Marples & Sons. The 2 larger screwdrivers are marked cross-ground skidproof point, chrome vanadium steel. These old Marples screwdrivers measure from 281mm up to 399mm (15 3/4") long overall. The two larger screwdrivers have a number of marks and dents.

A lovely little hardwood handled stubby screwdriver with brass ferule marked Wm Marples & Sons Sheffield. Eng. Has some loss of lacquer to handle.

Boxwood handled screw driver with brass ferule marked Buck Tot Court Rd. Has some speckling of light pitting and staining to blade. Handle is marked with a number of dents.

Overall length: 398mm (15 5/8")

A little 4 3/4" turnscrew made by W. Marples & Sons fitted with a beech handle and brass ferule. Handle is marked with the previous user's initials to either side of the wooden handle. Either side of blade is marked with light speckling of pitting and staining.

Overall length: 120mm (4 3/4")