A small old saw, handle is fitted with 2 brass split nut screws. Blade is marked with speckling of pitting to either side of blade. Handle is marked with the previous woodworkers name stamps. Collectable old saw.

Open handled pad saw marked Marsden Brothers Sheffield. Beech handle is fitted with 2 brass split nut screws. Previous woodworker has drilled a hole through handle for storage. Blade is marked with some minor speckles of pitting, has a very slight bend to blade. Nice old collectable saw. We believe this saw dates from 1850's to

An old beech handled hacksaw with brass ferule, has a crack to ferule. Makers name has faded appears to read '--- Ltd, Sheffield, 1920. Lacks blade and pins to hold blade in place. Length of frame is marked with speckling of light pitting.

Overall length: 465mm

An old ebony handled pad saw. Has a number of light dents to ebony handle and brass section.

A beech handled pad saw / keyhole saw by Spear & Jackson. Blade reads 'CD Wards Bays & Rye Swindon Spear & Jackson Trade Mark S & J. Blade is marked with some black staining and a few small patches of light pitting.

Beech handled flooring saw. Handle has 2 replacement buttons, 2 are made from brass the other 2 are made from steel, the medallion reads PAX Sandersons De Luxe. Handle has loss of lacquer, chips and bruising to spurs of handle. Reasonably sharp.

TPI: 7
Blade length: 19"

Beech handled floorboard saw, blade is marked with speckling of staining and light pitting.

Marples beech handled pull saw marked to blade Wm Marples & Sons Sheffield Warranted Cast Steel. Blade is marked with some speckles of staining and pitting marks.

Two saws, includes a Sandvik Telent Adjustable Hack Saw, appears to have seen very little use if any. The adjustable frame can hold 10” and 12” blades. The second saw is a Eclipse No. 66 general purpose saw, blades with this saw require sharpening.

Two beech handled pad saws with interchangeable blades, includes the following blades:
1 x 10tpi, 14” long, 1 x 7tpi, 16” long and 1 x 8tpi, 13” long.

Wooden bow saw made in England by Marples made from beech wood with brass fittings. Has slight loss of original lacquer.

Overall length from handle to handle: 588mm (23 1/8")