A japanned hand beader no. 66 made by Stanley marked to cast Stanley Pat Feb.9.86. Includes 2 fences (1 fence is a replacement from a nickel plated Stanley 66) and 8 cutters. Comes with a user made wooden box. The body of this woodworking tool maintains an estimated 80% of is finish. Good clean sole.

Beech handled router plane no. 71 made in England by Stanley. Includes 2 cutters (12mm & 6mm), depth stop, lacks side fence. Body retains an estimated 95% of its nickel plating.

Record no. 722 woodworking router plane. Retains an estimated 85-90% of its japanning. Sole is marked with some minor black staining marks. Retains a good length cutter, Record trade label and the original Record box.

A stained beech handled router plane no. 071 1/2 made by Record. Comes complete with all three cutters, side fence and the original Record box (box is in poor condition with one torn corner, hole in lid and fading). This Record router still maintains an estimated 97% of its japanning and the Record trade sticker. Sole is marked with some speckling of black staining.

Router plane no. 271 made by Stanley. Retains 95% of its nickel plating.

A fine little used nickel plated woodworking router plane no. 271 made by Stanley. Retains 99% of its nickel plating and includes the Stanley box (fragile box held together with tape).

Router plane no. 271 made by Stanley. Retains 96%+ of its nickel plating. Previous woodworker has drill 2 holes through top of cast (see photo).

Hand beader no. 66 made by Stanley. Includes 7 interchangeable cutters, two fences, the hand beader retains its original box though the box is in a very poor condition, lids barely held together and it's missing the Stanley label on the front of the box.. The beader itself retains an estimated 96-98% of nickel plating.

A little used nickel plated woodworking router no. 271 made by Stanley. Retains 99% of its original finish and comes with the Stanley box

A beech handled hand router plane no. 71 1/2 made by Stanley. Cast of plane reads Stanley no. 71 1/2 PAT'D 10-29-01. Includes 2 cutters a 12mm and a 6mm wide cutter. This hand router has had some good use, body lacks any nickel plating, handles are marked with a number of dents and the sole is marked with a number of scratches.

A Cheery handled scraper plane no. 112 made in USA by Lie Nielsen. Has a thick blade that has a patch of pitting across the width of the blade. Sole of plane is also marked with a few patches of mainly light pitting. This Lie Nielsen Scraper Plane no. 112 retains an estimated 95% of its finish.

A rosewood handle cabinet scraper plane no. 112 made by Stanley. Includes 2 replacement scraper blades: a thin longer scraper blade and a thick shorter blade (shorter blade is marked with speckling of pitting and black staining). The plane lacks its original black japanning. Outer body is marked a few patches of pitting.

An old beech handled box scraper no. 70 made by Stanley. Retains a good length cutter that is slightly convex to match the sole. The cutter is marked Stanley New Britain Conn USA. The sole is slightly convex from left to right as you look at the photograph. The sole of this box scraper is marked with some light speckling of pitting. Cast section of tool is japanned and retains an estimated 80% of its japanning.

A fine unused woodworking router plane no. 71 made in England by Stanley, fitted with the original hardwood handles. This woodworking router is complete with all three cutters, side fence, depth stop, Stanley leaflet, wax paper and original box. A fine router plane that appears unused retaining an estimated 99% of its finish.

A fine little nickel plated woodworking router plane no. 271 made by Stanley. Retains 99% of its nickel plating and the Stanley Box.

Cabinet scraper no. 080 made by Record. Retains a good length Record scraper blade. This woodworking maintains an estimated 75% of its japanning and the Record trade label.

A little woodworking router no. 722 made by Record. Retains an estimated 96% of its japanning and the original Record trade label. Has some minor staining to sole and cutter.

A rare cabinet scraper no. 53 made by Sargent with beech sole. Retains a good length Sargent scraper blade marked with some minor staining. This fine old cabinet scraper plane no, 53 retains an estimated 95% + of its japanning.

An old rosewood handled veneer scraper no. 12 made by Stanley. Brass adjuster is faintly marked Stanley Rule & Level Co New Britain CONN USA. This woodworking scraper plane is fitted with a good length replacement scraper blade. Sole is marked some pitting and scratching heavy in places. Handle has two bolts holding the handle in place. Body maintains an estimated 70-75% of japanning.

An early beech handled woodworking router plane no. 62 made by Sargent. Body of router is marked Made by Sargent & Co Newhaven CT USA no 62. Includes open throat and throat closing attachment, 12mm (1/2") cutter, lacks shoe (see photo). A nice old and collectable Sargent woodworking router plane no. 62.

Rare cabinet makers scraper plane no. 85 made by Stanley marked PAT.4-11-05 to cast, with tilting rosewood handles, handles have some very minor dents. Knurled thumbscrew is marked Stanley New Britain CONN USA. The inner body of this woodworking plane maintains an estimated 96 - 98% of its japanning. Outer body is marked with some minor marks/ scratches. A good clean Stanley no. 85 scraper plane.

Please contact old tools if you would like to see higher resolution photos of this woodworking plane.