A fine Record no. 03 bench plane with stained beech handles. This 03 bench plane retains a near full length Record tungsten steel best crucible cast cutter, an estimated 96% of its finish. Sides and sole retain the original machines marks. Handles have some slight loss and cracking of lacquer, rear handle retains the original Record trade label.

Stained beech handled smoothing plane no. 03 made by Record. This Record woodworking still retains a near full length Record tungsten steel best crucible cast cutter, an estimated 96-98% of its blue japanning. Sides and sole retain the original machines marks, sole has some speckling of light pitting. Handles have some loss and cracking of lacquer.

Beech handled smoothing plane no. 3 made in England by Stanley. Retains a near full length Stanley cutting iron. This woodworking plane maintains an estimated 97% of its japanning along with the original machine marks to sides and sole. Handles have some loss and cracking of lacquer mainly to front knob, has some minor staining to sides and sole.

Stained beech handled stay set smoothing plane no. 04 1/2 made by Record. Retains a near full length Record tungsten steel, best crucible cast cutter. This old woodworking planes maintains an estimated 95% of its finish, has slight loss of nickel to face plate. Sides and sole retain the original machine marks.

A stained beech handled smoothing plane no. 03 made by Record. This Record woodworking plane retains a near full length Record tungsten steel best crucible cast cutter. Body maintains an estimated 98-99% of its japanning. Rear handle retains the original Record trade label, handles have some loss and cracking of lacquer. Sides and sole retain the original machines marks, there are patches of black staining. Comes with the original box (box is in very poor condition, lid is incomplete in pieces, see photo).

A beech handled Chapman Acorn trade mark smoothing plane no. 4 made by Stanley. Plane has seen little use, retains a near full length cutting iron, body retains 98% of its finish, original Stanley trade label to rear handle and the original Stanley box (box has tears to corners of lid and some staining).

Beech handled smoothing plane no. 3 made in England by Stanley. Retains a good length Stanley plane iron, has some light pitting to label end of blade. Body maintains an estimated 90% of its japanning. Has two small patches of pitting and some scratching to sole. Side retain the original machine marks.

Smoothing plane no. 4 1/2 made by Union. Has a good length replacement Stanley plane iron. Retains an estimated 95% of its japanning. Sides of plane are marked with some mainly light pitting marks, sole has a number of clearly visible scratches.

A more recent plastic handled smoothing plane no. 4, made in England by Stanley. Retains a Stanley cutter. Body maintains an estimated 90% of its finish. Comes with Stanley box (worn and torn box). Rear handle has a number of dents. Has some light pitting / staining to side and sole.

Stained hardwood handled smoothing plane no. 9 made in USA by Millers Falls. Retains a near full length plane iron marked Millers Falls Tools since 1868, made in USA, 2 In. Lever cap is marked Millers Falls Pat No. 1822520. One side of plane is marked with some light patches of pitting, sole is marked with light scratching and minor pitting. Plane retains an estimated 96% of its finish.

A beech handled smoothing plane with metal body made by GTL. Body and cutter are marked with speckling of pitting and black staining.

A fine beech handled smoothing plane no. 3 made in England by Stanley. Retains a full length Stanley plane iron. A fine plane that has seen very little use if any still retaining the original machine and an estimated 99% of its finish. This Stanley no. 3 woodworking plane comes complete with the Stanley trade label, box and leaflet.

A fine Record Calvert Stevens smoothing plane CS88. This limited edition heavy duty plane has a gun metal lever cap combines with the stay-set cap iron. Plane iron has a hardened cutting edge to provide razor sharp accuracy lasting 8 times longer than conventional irons, this is mounted on a precision machined frog. The Norris type cutter adjustment allows micro meter sensitivity for depth of cut and easy alignment. The whole assembly is mounted on a body cast from fine grey iron.

For craftsman in wood it is fitting that total comfort and control are assured with matt finish rosewood knob and handle. This rare Calvert Stevens bench plane includes a hardened case with contoured felt lining.

This plane has seen very little use and is in excellent condition still retaining much of the original protective coating to the plane body and cutter. Comes with Calvert Stevens leaflet.

Stay set smoothing plane no. 04 made by Record. Retains a near full length Record best crucible cast tungsten steel cutter, body maintains an estimated 80% of its blue japanning. Previous user has enlarged the rear handle hole of the screw thread, see photo, still a solid handle. Rear handle is possibly made from rosewood with a beech front knob. Lateral adjuster is marked war finish, cap iron is marked Patent No. 362743. Sides and sole are marked with some light markings through use.

Beech handled smoothing plane M3 made in Sheffield England by Marples. Has a good length replacement Record tungsten vanadium steel cutting iron. Rear handle is marked with some spots of paint, body retains 80% of its finish. Retains original machine marks to sole and sides. Sole has 2 small patches of light pitting / staining.

Rosewood handled smoothing plane no. 9 made in USA by Millers Falls. Retains a near full length plane iron marked Millers Falls Tools since 1868, made in USA, 2 In, iron is marked with some staining. Lever cap is marked Millers Falls Pat No. 1822520. Plane is marked with some minor spots of pitting / staining. This Millers Falls smoothing plane retains an estimated 95% of its finish.

Rosewood handled smoothing plane M4 1/2 made by Marples. Retains a near full length W. Marples & Sons, Sheffield England, Solid crucible steel plane iron. Sides and sole retain the original machine marks. Has a few light dents to body. Top section of blade is marked with a patch of minor pitting. Body retains 90% of its finish and the original Marples trade label.

A fine probably unused stained beech handled smoothing plane no. 04 1/2 by Record. Cutter is marked Record tungsten vanadium steel. This more recent woodworking planes maintains an estimated 99% of its finish, original machine marks to sides and sole, also retains much of the protective coating.

A Sheffield made smoothing plane X4 by Marples with closed beech handle. Cutting iron is marked W.Marples & Sons Sheffield England. Handles have some loss of lacquer mainly to front knob. The Marples X4 features an adjustable mouth that is adjusted by 2 screws behind the front knob. Body retains an estimated 90-95% of its japanning, sides and sole retain the original machine marks.

Stained beech handled smoothing plane with corrugated sole, no. 4C made in USA by Stanley. Retains a near full length Stanley USA plane iron. Body has some minor speckles of staining and minor speckles of paint. Body maintains an estimated 96% of its finish.

A fine Record Calvert Stevens bench plane CS88. This limited edition heavy duty plane has a gun metal lever cap combines with the stay-set cap iron. Plane iron has a hardened cutting edge to provide razor sharp accuracy lasting 8 times longer than conventional irons, this is mounted on a precision machined frog. The Norris type cutter adjustment allows micrometer sensitivity for depth of cut and easy alignment. The whole assembly is mounted on a body cast from fine grey iron.

For craftsman in wood it is fitting that total comfort and control are assured with matt finish rosewood knob and handle. This rare Calvert Stevens bench plane includes a hardwood case.

This lovely plane has seen very little use and comes complete with original box and leaflet.

A fine little used beech handled smoothing plane no. 03 made by Record. This Record woodworking plane has seen very little use and still retains a near full length Record tungsten vanadium steel cutter. Body maintains an estimated 98-99% of its finish. Rear handle retains the original Record trade label. Sides and sole retain the original machines. The plane is marked with some minor speckles of black staining. A fine no. 03 smoothing plane that comes with the original Record box (has tear to one corner of lid), good clean sole.

A plastic handled smoothing plane no. 4 1/2 made in England by Stanley. Retains a near full length Stanley cutting iron. This woodworking plane maintains an estimated 96% of its finish, outer body retains the original machine markings.

Two woodworking tools made by Record, includes:
1 x Record no. 0102 block plane that retains an estimated 85-90% of its finish.
1 x Record adjustable flat bottom spokeshave no. 0151. Sole is marked with light speckling of pitting.

A beech handled stay-set smoothing plane no 04SS, made by Record. This Record woodworking plane retains a Record best crucible cast, tungsten steel cutter. body maintains an estimated 85% of its blue japanning. Handles retain little of the original lacquer. Sole is marked with some light scratches and minor spots of staining.

A scarce rosewood handled no. 2 smoothing plane made by Stanley. Retains a near full length Stanley SW (sweetheart) made in USA plane iron. Has a good repair to rear handle (crack through middle, see photo), also marked with twice with the previous woodworkers name stamp. Sides and sole have some minor marks and dents. Body retains an estimated 90-95% of its japanning.

A fine rosewood handled smoothing plane made by Sedgley model no. S5. Retains a near full length cutting iron marked Sedgley made in England best crucible cast tungsten steel. A fine plane that retains good clean handles, 99% of its finish and original machine marks. Has some minor scratches to sole

A fine beech handled smoothing plane no. 3 made in England by Stanley. Retains a near full length Stanley plane iron. A fine plane that has seen very little use still retaining the original machine marks to outer body, inner body maintains an estimated 99% of its japanning. Has some very minor black staining to sides of the plane. This Stanley no. 3 woodworking plane comes complete with the Stanley wax paper and original box.

Corrugated smoothing plane no. 4c, made in England by Stanley. Has a replacement handle with a rosewood rear handle and beech knob. Retains a good length Stanley cutter. Blade and outer body are marked with some speckling of pitting. Inner body maintains an estimated 85 - 90% of its finish.

Brass smoothing plane with stained beech handles made by GTL. Blade is marked with spekling of pitting to bottom half and heavy pitting to top half of blade.

A probably unused stained beech handled smoothing plane no 04 1/2 by Record. Retains a full length Record tungsten vanadium steel cutter. This woodworking plane has been re-sprayed in places by the previous user. A fine plane that retains the original machines marks to sides and sole, handle retains the original Record trade label. Complete with Record box.

A fine stained beech handled smoothing plane no 03 made by Record. This Record woodworking plane has seen very little use and still retains a near full length Record tungsten steel best crucible cast cutter. Body maintains an estimated 98-99% of its blue japanning, appears to have a very small touch up of paint in places. Rear handle retains the original Record trade label. Sides and sole retain the original machines marks along with much of the original protective coating to the sides. The plane is marked with some minor speckles of black staining. A fine no. 03 smoothing plane that comes with the Record box.

An unused smoothing plane no 4 1/2 made by Stanley with beech handles. This woodworking plane is unused and still retains the original protective coating to body of plane, Stanley trade label, wax paper, leaflet and the original box.

A fine Record Calvert Stevens bench plane CS88. This limited edition heavy duty plane has a gun metal lever cap combines with the stay-set cap iron. Plane iron has a hardened cutting edge to provide razor sharp accuracy lasting 8 times longer than conventional irons, this is mounted on a precision machined frog. The Norris type cutter adjustment allows micrometer sensitivity for depth of cut and easy alignment. The whole assembly is mounted on a body cast from fine grey iron.

For craftsman in wood it is fitting that total comfort and control are assured with matt finish rosewood knob and handle. This rare Calvert Stevens bench plane includes a hardened case with contoured felt lining, also includes a signed certification .

This plane seen very little use, has some very light scratches / minor black staining marks to body and cutter. Still maintains a near full length cutting iron.

Beech handled smoothing plane no. 04 made by Record, retains a near full length tungsten steel best crucible cast cutter. Body maintains an estimated 95% of its japanning, sole is marked with scratch/ gouge to front end of sole, retains faded machine marks to sides and sole of this woodworking plane, rear handle retains the original Record trade label.