LS Starrett Co.LTD micrometer made in Great Britain, with original case has some wear.

Model: 230
Condition: G+
Tool Manufacturer: Starrett
Delivery: A
Price : £15.00

An old pair of dividers marked Thewlis & Co Warrington. This old tool is marked with the previous users name stamp. Nice old collectable tool.

Length: 9 1/2" (240mm)

Model: --
Condition: G/G+
Tool Manufacturer: Thewlis and Co
Delivery: A
Price : £40.00

Three early screw plates, the smallest is marked Plucknett & Co and measures 122mm long (has had two small screws broken off), the largest screw plate is marked out with numbers 1 - 8, 1/16, 3/16 and the letter B, the other screw plate has medium to heavy pitting  and no markings. Nice old collection.

Model: n/a
Condition: G
Tool Manufacturer: --
Delivery: A
Price : £28.00

An old pair of dividers with brass hinge. This old pair of dividers are marked with a logo of a clenched fist holding an object also marked with the makers name which has faded and tools to base of logo, plus the number 7. These dividers measure 186mm long overall.

Model: n/a
Condition: G/G+
Tool Manufacturer: (names faded)
Delivery: A
Price : £42.00

A pair of dividers made by Buck & Ryan. Measures 10 1/4" (262mm) long overall and open out to 14 1/4" (362mm). Has a chip out of the rear of the guide plate, (useable tool).

Model: n/a
Condition: G
Tool Manufacturer: Buck and Ryan
Delivery: A
Price : £18.00

An old Saddlers tool we believed to be a washer cutting compass with wide blade. Blade measures 14mm wide, overall this old tool measures 164mm long.

Model: n/a
Condition: G+
Tool Manufacturer: T Dixon
Delivery: B
Price : £55.00

A stainless steel medical tool marked Med Supply London, also has some measurements 0-20 INS. This tool measures 360mm high.

Model: n/a
Condition: G++
Tool Manufacturer: Med Supply London
Delivery: A
Price : £20.00

Two miniature brass measuring tools, a pair of brass callipers marked Inches, Meter, the callipers measure 79mm high and come with a leather pouch that's marked Mining & Engineering Agencies. There's also a little brass wire gauge that measures 57mm high.

Model: n/a
Condition: G+
Tool Manufacturer: 1 x Mining and Engineering Agencies, 1 x unnamed
Delivery: A
Price : £24.00

Large pair of steel dividers marked H. Brindley dated 1917 also appears to have the ministry arrow. Measures 9 15/16" (253mm) long overall and opens to 13 ¾" (349mm) wide. Has AM printed near the top of the dividers.

Model: n/a
Condition: G
Tool Manufacturer: H. Brindley
Delivery: B
Price : £35.00

Old pair of dividers with teethed adjuster rail and thumb screw adjuster. Measures 6 ¼" (158mm) long overall and adjust to 9" (228mm) wide. Has initials FR printed into these old dividers.

Model: n/a
Condition: G+
Tool Manufacturer: unnamed
Delivery: A
Price : £35.00

An old pair of dividers marked A.Parr Rainhill 1916. Measures 145mm high, this old tool has had some good use in its time, points could be sharper and the tool also has a number of dents.

Model: n/a
Condition: G
Manufacturer: A.Parr
Delivery: A
Price : £30.00

1 x feeler gauge ,marked Chesterman - Tre - Ble - Sheffield made in England no  5811/20, 1/1000. 1 x feeler gauge marked Moore & Wright Sheffield no 13, had some good use. 1 x feeler gauge marked Safe & Sure no 911, Sheffield England. The smallest is unmarked.

Model: n/a
Condition: G+
Tool Manufacturer: Moore & Wright, Chesterman, Safe and Sure
Delivery: A
Price : £18.00

Old brass mitre template marked H.Slater maker Mertbith st Cleakenwell London. Has a few scratch's and dents. Measures 4 15/16" wide by 1 1/2" high.

Model: n/a
Condition: G
Tool Manufacturer: H. Slater
Delivery: B
Price Was: £50.00
Now: £35.00

An old and unusual pair of steel dividers with brass locking nut. These dividers are marked J.Nesbitt and measure 212mm long overall.

Model: n/a
Condition: G/G+
Manufacturer: unnamed