|
 Page
Results: <<
| < |
1 | PAGE 2 |
 |
SOLD Disston Panel Saw
Aluminium and hardwood handled panel saw by Henry Disston. Blades marked Disston, “The beauty finish and utility, this saw cannot be excelled”. Established 1840 D-100, 10 points, Chrome nickel alloy steel, fully taper ground, precision set-bevel filed. H.K. Porter Company (Canada) Ltd. Henry Disstons Toronto Canada. Blade measures 22” long with 10 points per inch. This panel saw appears to of had very little use if any, retains the original Disston sleeve (slightly torn), blade and handle are coated with probably the original protective coating. (Needs sharpening).
Model: D-100
Condition: G++
Tool Manufacturer: Disston |
|
| |
 |
SOLD Disston Philadelphia Adjustable Scarfing Saw
A rare adjustable scarfing saw by Disston Philadelphia with a decorative carved fruit wood handle. Double sided blade with 9 tpi and 13 tpi. Main steel frame’s marked Patented JAN’Y 27-1914. Blade has patches of light pitting and staining. A nice collectable old tool.
Model: --
Condition: G/G+
Tool Manufacturer: Disston Philadelphia |
|
| |
 |
Henry Disston Panel Saw
An old panel saw marked Henry Disston & Sons Key Stone saw works, Philadelphia USA D-7. Handle’s marked with the previous users name stamp, blade patches of pitting close to the tip of this woodworking saw.
TPI: 10
Blade Length: 22”
Model: D-7
Condition: G
Tool Manufacturer: Disston
Delivery: D
Price : £30.00 |
|
| |
 |
SOLD Spear and Jackson Cross Cut Saw
A nice clean cross cut saw marked "Spear & Jackson New
Spearior 88, Long life steel - Stays sharp, made in Sheffield England".
Blade measures around 24" long. This mahogany handled Spear
& Jackson saw has is in a lovely condition and appears to of
had very little use if any, includes its original saw cover.
Model: N/a
Condition: F/N
Tool Manufacturer: Spear and Jackson
|
|
| |
 |
Spear and Jackson Dovetail Saw (15 tpi)
Beech handled brass backed dovetail saw marked to blade “ Spear & Jackson Spearior 52. Long life steal stays sharp- Made in Sheffield - England. Blade measures 8” long with 15 points per 25mm. Handles held in place by 3 brass buttons. This is a fine saw that’s seen very little use and maintains most of its original protective coating.
Model: N/a
Condition: F/N
Tool Manufacturer: Spear and Jackson
Delivery: B
Price : £30.00 |
|
| |
 |
Spear and Jackson Cross Cut Saw (6 tpi)
Mahogany handled cross cut saw by Spear and Jackson. The blade has speckling and patches of black staining mainly to the rear of the blade. Blade measures 26” long overall with 6 tpi. Teeth need sharpening.
Model: n/a
Condition: G+
Tool Manufacturer: Spear and Jackson
Delivery: D
Price : £30.00 |
|
| |
 |
SOLD Disston Cross Cut Saw
Disston cross cut saw, buttons marked Disston Canada, writing on blade has faded slightly. Blade measures 26" long and the saw measures 28 5/8" long overall. The saw has 6 points per inch (25mm). Top of handle has slight loss of lacquer.
Model: n/a
Condition: G+/G++
Tool Manufacturer: Disston
|
|
| |
 |
SOLD Tyzack Panel Hand Saw (10tpi)
A boxed and unused panel hand saw with a beech handle. Blades
marked 'Nonpareil No 154 The result of more than 150 years saw making.
This saw carries a full guarantee. W.Tyzack Sons & Turner Ltd
- Sheffield - England'. Blade measures 22" long and has 10
points per 25mm. Handles held in place by four brass buttons. This
hand saw appears unused maintaining its original protective coating,
Tyzack trade label and box.
Model: 154
Condition: F/N
Tool Manufacturer: Tyzack |
|
| |
 |
SOLD Spear and Jackson Pad Saw
A beech handled pad saw with four interchangeable blades all
of which appear to be unused still maintaining the protective coating
and are marked Made in England Spear and Jackson Sheffield. The
pad saw blades measure 2 x 17" long (8tpi), 1 x 14"
long (7tpi) and 1 x 10" long (10tpi).The pad saw seen very
little use.
Model: n/a
Condition: F/N
Tool Manufacturer: Spear & Jackson
|
|
| |
 |
Old Spear and Jackson Cross Cut Saw
Old cross cut saw marked Spear and Jackson. 7 points per 25mm.
The top rear of the handle has a chip out of it. The saw measures
29" (736mm) long.
Model: n/a
Condition: G/G+
Tool Manufacturer: Disston
Delivery: D
Price : £30.00
|
|
| |
 |
Miniature Saw
Old wooden handled miniature saw, has some pitting to blade.
Measures 12 1/2" O/A (318mm).
Model: n/a
Condition: G
Tool Manufacturer: unknown
Delivery: A
Price : £20.00
|
|
| |
 |
SOLD Disston Philadelphia Tenon Saw
Brass backed tenon saw, brass back is marked Henry Disston &
Sons Philad'a. USA Cast-Steel Waranted. Blades marked Henry Disston
& Sons, Keystone Saw Works Philadelphia USA. Registered US
PAT OFF.
Model: n/a
Condition: G+
Tool Manufacturer: Disston
|
|
| |
| Page
Results: <<
| < |
1 | PAGE 2 |
| |
|
