 Page Results: PAGE 1
| 2 | > | >>
Please note: Saws may require sharpening |
|
 |
Disston Panel Saw 17 inch
A short 17” panel saw made by Disston. Handle is fitted with 4 brass buttons one of which is marked Disston & Sons Philada PAT DEC . Handle is marked with previous user’s name stamp and has a large chip from the top rear of handle, blades marked with black staining / minor pitting.
Model: --
Condition: G/G+
Tool Manufacturer: Disston
Delivery: B
Price : £46.00 |
|
| |
 |
SOLD Disston Philadelphia Tenon Saw
Brass backed tenon saw marked Henry Disston and Sons Philada UA, Cast Steel Warranted. Handle has 3 brass buttons, one is marked Disston & Sons Philada. Blade is marked with some black staining and very minor pitting, handle is also marked with staining.
Model: --
Condition: G+
Tool Manufacturer: Disston |
|
| |
 |
Disston Philadelphia Cross Cut Saw
Cross cut saw made by Disston. Blade is marked Henry Disston & Sons, Keystone Saw Works, Philadelphia USA, D-7. Blade is marked with some very minor speckles of pitting and some light staining. Handle has some loss and cracking of lacquer. Handle is fitted with 4 brass buttons one of which is marked Disston Phila.
Model: --
Condition: G+
Tool Manufacturer: Disston
Delivery: D
Price : £38.00 |
|
| |
 |
Henry Disston Tenon Saw
Brass back tenon saw marked Henry Disston & Sons Philada USA Cast Steel, Warranted. Handle is marked with a small user’s name stamp, blades marked with some speckling of black staining. Handle is fitted with 3 brass buttons one of which is marked H. Disston & Sons Philada.
Model: --
Condition: G+
Tool Manufacturer: Disston
Delivery: D
Price : £46.00 |
|
| |
 |
SOLD Groves Dovetail Saw
An early brass back dovetail saw marked R. Groves & Sons Sheffield USE Silver steel elastic spring temper warranted. Brass button is marked Richard Groves & Sons Sheffield USE. Blade is marked with black staining and some very minor pitting. Handle is marked with some denting and the previous user’s name stamp, rear of handle has large chips from both the top and bottom of handle.
Model: --
Condition: G
Tool Manufacturer: Groves
|
|
| |
 |
SOLD Drabble and Sanderson Tenon Saw
An early beech handled, brass back tenon saw marked Drabble & Sanderson, J. Gleaves & Son Manchester, Warranted Sheffield Cast Steel. Handle has a number of nicks and dents, previous users name stamp and one of the brass buttons has been replaced. A good sharp saw
Model: --
Condition: G
Tool Manufacturer: Drabble and Sanderson
|
|
| |
 |
Disston Cross Cut Saw
Carved handled cross cut saw made by Disston. Blades marked with speckling of staining.
Model: --
Condition: G+
Tool Manufacturer: Disston
Delivery: D
Price : £33.00 |
|
| |
 |
E.T. Roberts and Lee Rip Saw
Beech handled rip saw made by E.T. Roberts & Lee. Marked with some light staining to blade.
Model: --
Condition: G+
Tool Manufacturer: E.T. Roberts and Lee
Delivery: D
Price : £25.00 |
|
| |
 |
Disston Cross Cut Saw
Carved handled cross cut saw made by Disston. Marked down length of blade with speckling of staining. Requires sharpening.
Model: --
Condition: G
Tool Manufacturer: Disston
Delivery: D
Price : £28.00 |
|
| |
 |
Disston Tenon Saw
Tenon saw marked to blade Disston D8 Established 1840, For beauty, finish and utility this saw cannot be excelled Henry Disstons. Requires sharpening.
Model: --
Condition: G/G+
Tool Manufacturer: Disston
Delivery: B
Price : £28.00 |
|
| |
 |
Marples Tenon Saw
Tenon saw marked to steel back Wm Marples & Sons Ltd Sheffield England Stainless Steel, blade is marked Wm Marples & Sons Ltd Trade Mark Hibernia Warranted Cast Steel Sheffield Stainless steel. Handle is faintly marked with previous user’s name stamp.
Model: --
Condition: G+
Tool Manufacturer: Marples
Delivery: B
Price : £25.00 |
|
| |
 |
GTL Cross Cut Saw
An old cross cut saw marked to blade GTL London Spring Temper, warranted cast steel made in Sheffield, made specially for Guranteed Tools Ltd. Blade is marked with some black staining. Handle has some slight loss of the original finish. May require sharpening.
Model: --
Condition: G/G+
Tool Manufacturer: GTL
Delivery: D
Price : £38.00 |
|
| |
 |
Disston Cross Cut Saw
Cross cut saw made by Disston, handle has 5 buttons one of which is marked Disston Cnanda, handle has been sanded clean by the previous user. Blade is marked with some speckling and patches of mainly light pitting.
Model: --
Condition: G
Tool Manufacturer: Disston
Delivery: D
Price : £32.00 |
|
| |
 |
Two Spear and Jackson Cross Cut Saws
Two more recent beech handled cross cut saws made by Spear & Jackson with good clean blades and handle
Model: --
Condition: G++
Tool Manufacturer: Spear and Jackson
Delivery: D
Price : £25.00 |
|
| |
 |
Floorboard Saw
Beech handled floorboard saw, blade is marked with speckling of staining and light pitting.
Model: --
Condition: G
Tool Manufacturer: --
Delivery: B
Price : £14.00 |
|
| |
 |
Spear Jackson Cross Cut Saw
Stained beech handled cross cut saw made by Spear & Jackson. Handles has some slight loss of enamel.
Model: --
Condition: G/G+
Tool Manufacturer: Spear Jackson
Delivery: D
Price : £18.00 |
|
| |
 |
Spear and Jackson Cross Cut Saw
Beech handled cross cut saw, blades marked Spear & Jackson New Spearior 88 Long life steel stays sharp. Marked with previous users name stamp to handle.
Model: --
Condition: G++F
Tool Manufacturer: Spear and Jackson
Delivery: D
Price : £32.00 |
|
| Page Results: PAGE 1
| 2 | > | >> |
| |
