|
 Page Results: <<
| < | 1 | PAGE 2 | 3 | > | >> |
|
 |
SOLD Stanley Core Box Plane No. 57
An early rosewood handled core box plane no. 57 made by Stanley. Marked to main body No. 57. PAT 3-10.96. Side extensions are marked Stanley, also marked with ‘B’. Retains the original cutter that reads Stanley Rule & Level Co. Body maintains an estimated 85%-90% of its nickel plating.
Model: 57
Condition: G+
Tool Manufacturer: Stanley |
 |
| |
 |
Slater Shoulder Plane
An old shoulder plane with rosewood infills and wedge made by H. Slater Maker Meredith St Clarkenwell London. The shoulder plane has a good length cutter marked W. Marples & Sons Cast Steel. Outer body is in good condition with some very minor dents, good sole with a fine mouth free from chips. Wedge and infill are marked with the previous users name stamp.
Model: --
Condition: G+/G++
Tool Manufacturer: Slater
Delivery: D
Price : £155.00 |
|
| |
 |
SOLD Spiers Shoulder Rebate Plane
A dovetailed shoulder rebate plane with rosewood infills and wedge marked to front of plane Spiers Ayr. Cutter is unnamed and has a chip off the top of the cutter. This old woodworking plane has a number of dents, scratches, and pitting marks. Has previous user name stamp to front and rear of plane also users name has been punched into one side of the plane. The mouth of the plane has been made wider by the previous user (see photo), reflected in the price.
Model: --
Condition: G
Tool Manufacturer: Spiers Ayr
|
|
| |
 |
SOLD Norris Smoothing Plane A5
Coffin shaped A5 smoothing plane by Norris, post war. Retains the original good length cutting iron marked Norris London to front side and Robt Sorby to the rear. Cutter has 40mm (1 1/2") to the slot. Lever cap is also marked Norris London along with the brass knurled blade adjusting knob. The original machine marks can be faintly seen to sides of the plane. The sole is marked with some light scratches and two very small patches of minor pitting. Infills are marked with the previous users name stamp, front infill has slight loss of lacquer. A fine old A5 smoothing plane in good condition.
Model: A5
Condition: G+
Tool Manufacturer: Norris
|
|
| |
 |
SOLD Stanley Low Angle Plane No 62
A scarce rosewood handled low angle plane no 62 by Stanley. Retains the Stanley cutter. Rear handle has two small chips to top of handle (see photo). Body maintains an estimated 95% of its japanning. Outer body has some speckling of light pitting and scratches. A nice old collectable tool.
Model: 62
Condition: G+
Tool Manufacturer: Stanley |
|
| |
 |
SOLD Gunmetal Shoulder Plane
Steel soled gunmetal shoulder plane with rosewood infill and wedge. Plane iron is marked Ward cast steel and has speckling of pitting. This old plane has a number of large and minor dents to the gunmetal body. The front and rear of the plane are marked with the previous users name stamps, steel sole is marked with speckling of pitting, wedge is marked with a saw cut that’s barley visible when wedge is in place.
Model: --
Condition: G
Tool Manufacturer: -- |
|
| |
 |
Buck Dovetailed Shoulder Plane
Dovetailed shoulder rabbet plane marked to front of plane buck 247 Tottm court Rd. Fitted with a good length cutting iron by I.Sorby. The wedge and infills are made from rosewood and both marked with the number 17. Rear of plane is marked with a number of dents, front end is marked with the previous users name stamp, mouth is slightly rounded (see photo). Body is marked with a few patches of pitting / staining.
Model: --
Condition: G
Tool Manufacturer: Buck
Delivery: E
Price : £110.00 |
|
| |
 |
SOLD Scottish Iron Smoothing Plane
A shapely Scottish iron smoothing plane with stepped toe and mahogany infills. Cutting iron’s marked Alex Mathieson & Son, Warranted Cast Steel, blade cover’s marked Sorby. Sole measures 10 1/2"long overall by 2 3/4" wide, has a small patch of minor pitting, usual scratching to sole through ware. An extremely well repaired repair to the spur of the handle, almost unnoticeable. A very nice old plane.
Model: --
Condition: G+
Tool Manufacturer: unnamed |
|
| |
 |
Dovetailed Jack Plane
Dovetailed jack plane 13 3/4" long with mahogany infills, blade is marked Sorby, the cap iron is marked Alex Mathieson & Son, both blade and cap iron are marked with large patches of pitting. Sides and sole of plane is marked with pitting and chips to mouth see photo.
Overall Length: 348mm 13 3/4"
Model: --
Condition: G
Tool Manufacturer: --
Delivery: E
Price : £280.00 |
|
| |
 |
I.Sorby Parallel Iron and Cap
A parallel iron and plane iron cap. Both marked I.Sorby. The Sorby cutting iron measures 54mm wide, 4mm thick and 189mm long overall. The plane iron caps in a nice clean condition.
Model: n/a
Condition: G++
Tool Manufacturer: I.Sorby
Delivery: B
Price : £38.00 |
|
| |
 |
SOLD Brass Horn Shoulder Plane
Brass horn shoulder plane with ebony infil and wedge, blades
marked Ward Cast Steel. Printed on the front of the plane body
is C.J Bassett. The base of the plane has a steel bottom. Little
remains of current blade.
Model: n/a
Condition: G+
Tool Manufacturer: unknown
|
|
| |
 |
Coffin Shaped Smoothing Plane
An old dovetailed coffin shaped smoothing plane with hardwood Infills, cutting irons marked Warranted I.Sorby Cast Steel Sheffield and has roughly 1” (25mm) of blade left to the slot. The plane iron cap is marked Ward Solid Steel Warranted. This old woodworking plane has some wear due to its old age, front and rear buns have previous users name stamp, the front bun also has a small crack 18mm long. The body of the plane has some light pitting/ staining, a chip to one side of the mouth, lever cap has a few minor dents. This old dovetailed smoothing plane measures 189mm (7 7/16”) long by 66mm (2 5/8”) wide.
Model: n/a
Condition: G
Tool Manufacturer: unnamed
Delivery: E
Price : £160.00 |
|
|
|
| |
| Page Results: <<
| < | 1 | PAGE 2 | 3 | > | >> |
