|
Page
Results: PAGE 1 | 2 | 3 | > | >> |
| |
 |
Stanley Side Rabbet Plane no. 79
A little nickel plated side rabbet plane no. 79 made in England by Stanley. Retains two near full length Stanley cutters, this model was made before the fence was added. Body maintains an estimated 96-98% of its nickel plating and comes with the original Stanley box.
Model: 79
Condition: G+
Tool Manufacturer: Stanley
Delivery: D
Price : £52.00 |
 |
| |
 |
SOLD Stanley No. 90J Bullnose Plane
A fine bullnose plane no. 90J made in England by Stanley. Retains a full length Stanley cutting iron. This woodworking plane has seen very little use, body maintains the original machine marks and 99% of its finish.
Model: 90J
Condition: F
Tool Manufacturer: Stanley |
 |
| |
 |
SOLD Stanley Carriage Makers Rabbet Plane no. 10 1/2
A fine beech handled carriage makers plane no. 10 1/2, made in England by Stanley. Retains a near full length Stanley cutter. This woodworking plane has seen little use, body maintains an estimated 98% of its japanning. Outer body retains the original machines marks and comes complete with the Stanley box.
Model: 10 1/2
Condition: F
Tool Manufacturer: Stanley |
 |
| |
 |
Stanley Side Rebate Plane no. 79
Nickel plated side rebate plane no. 79 made in England by Stanley. Retains two near full length Stanley cutters, lacks side fence. This little Stanley woodworking plane is maintains an estimated 99% of its nickel plating and comes a user made wooden box.
Model: 79
Condition: G++
Tool Manufacturer: Stanley
Delivery: B
Price : £50.00 |
 |
| |
 |
Stanley Shoulder Plane no. 93
A nickel plated shoulder plane no. 93 made by Stanley, retains a good length Stanley cutter. Body maintains an estimated 98% of its nickel plating.
Model: 93
Condition: G++/F
Tool Manufacturer: Stanley
Delivery: D
Price : £70.00 |
 |
| |
 |
Record Side Rabbet Plane No. 2506
A side rabbet plane no.2506 made in England by Record. Retains two good length Record tungsten steel cutters. Knob has little of the original lacquer remaining, this plane has a small chip to the front corner of the plane. This woodworking plane maintains an estimated 95% of its nickel plating and part of the original Record label and the original fence.
Model: 2506
Condition: G/G+
Tool Manufacturer: Record
Delivery: B
Price : £46.00 |
 |
| |
 |
Stanley Side Rebate Plane no. 79
An early side rebate plane no. 79 made in USA by Stanley. Retains two near full length cutters both marked Stanley made in USA. A nice old collectable Stanley woodworking plane that maintains an estimated 90% of its nickel plating.
Model: 79
Condition: G+
Tool Manufacturer: Stanley
Delivery: D
Price : £60.00 |
 |
| |
 |
SOLD Stanley Corner Rounding Plane no. 144
A scarce 3/8 inch corner rounding plane no. 144, marked to body Stanley No.144 PAT APL’D FOR, Made in USA, sole is marked 3/8 CIR. This old corner rounding plane maintains an estimated 80% of its japanning. Cutter is marked Stanley SW New Britain CONN USA 3/8 CIR. A old collectable plane.
Model: 144
Condition: G/G+
Tool Manufacturer: Stanley
|
 |
| |
 |
Stanley Carriage Makers Rabbet Plane 10 1/2
Beech handled carriage makers rabbet plane no. 10 1/2 made in England by Stanley. Handles have some slight loss and cracking to the lacquer. Retains a near full length Stanley cutter. A fine woodworking plane with only faint scratches to outer body, inner body still retains an estimated 95%+ of japanning.
Model: 10 1/2
Condition: G++
Tool Manufacturer: Stanley
Delivery: E
Price : £110.00 |
 |
| |
 |
Stanley Carriage Makers Plane no. 10 1/2
Rosewood handled carriage makers rabbet plane no. 10 1/2 made by Stanley. Retains a good length Stanley cutter. Outer body is marked with patches of pitting mainly to one side of the plane, sole is marked with light scratching. Body maintains an estimated 90% of its japanning, face plate has some slight loss of nickel plating.
Model: 10 1/2
Condition: G/G+
Tool Manufacturer: Stanley
Delivery: E
Price : £92.00 |
 |
| |
 |
Slater Bullnose Plane
A fine mouthed bullnose plane marked to iron body Slater Maker Meredith St Clerkenwell London. Plane irons marked W Marples and Son Cast Steel. This old bullnose plane also has a nicely shaped rosewood wedge that is in a good condition. The body of this woodworking plane has some light staining. A nice plane for its age free from dents.
Model: n/a
Condition: G+
Tool Manufacturer: Slater
Delivery: D
Price : £68.00 |
 |
| |
 |
Holland Bullnose Woodworking Plane
Steel bullnose woodworking plane believed to be by Holland, the cutter is marked Holland London,with little cutter remaining. The wedge has had a solid previous repair, hard to notice. The rear of the plane has a number of dents and lacks its rear button. Body and cutter has some speckling of mainly light pitting. Mouth of plane has been slightly rounded close to the corners.
Model: --
Condition: G
Tool Manufacturer: --
Delivery: D
Price : £50.00
|
|
| |
Page
Results: PAGE 1 | 2 | 3 | > | >> |
|