 Page
Results: << | < | 1 | PAGE 2 |
|
 |
Robert Sorby Woodworking Gouges
Four boxwood handled gouges with steel ferules by Robert Sorby Sheffield. Largest gouge measures 32mm wide by 405mm long overall. Another gouge measures 10mm wide by 350mm long overall. One measures 9mm wide by 350mm long overall. The last gouge measures 4mm wide by 342mm long overall. All are marked with the initials SC.
Model: n/a
Condition: G+
Tool Manufacturer: sorby
Delivery: D
Price : £65.00 |
|
| |
 |
I.Sorby Parallel Iron and Cap
A parallel iron and plane iron cap. Both marked I.Sorby. The Sorby cutting iron measures 54mm wide, 4mm thick and 189mm long overall. The plane iron caps in a nice clean condition.
Model: n/a
Condition: G++
Tool Manufacturer: I. Sorby
Delivery: B
Price : £38.00 |
|
| |
 |
SOLD I.Sorby Parallel Iron and Cap
A near full length parallel iron marked I.Sorby cast steel Sheffield, measures 54mm wide by 190mm long and 4mm thick. Iron covers also marked I.Sorby Sheffield.
Model: n/a
Condition: G+
Tool Manufacturer: I. Sorby |
|
| |
 |
SOLD Sorby Parallel Iron
A parallel iron by I.Sorby of Sheffield measures 64mm wide by 173mm long and 4mm thick..
Model: n/a
Condition: G/G+
Tool Manufacturer: I. Sorby |
|
| |
 |
Robert Sorby Paring Gouge
Boxwood handled gouge with steel ferule, blades marked Robert Sorby Sheffield. This tool measures 32mm wide by 408mm long overall. Blade to ferule measures 248mm long. The chisel has some pitting to the front of blade.
Model: n/a
Condition: G+
Tool Manufacturer: Sorby
Delivery: A
Price : £24.00 |
|
| |
 |
SOLD I.Sorby Paring Gouges
Two boxwood handled paring gouges with brass ferules, largest is marked I.Srby Sheffield measures 31mm wide by 375mm long overall, blade to ferule measures 229mm long. The tool has two hairline cracks to handle. The smaller woodworking gouge is also marked I.Sorby Sheffield and measures 7mm wide by 300mm long overall blade to ferule measures 169mm long.
Model: n/a
Condition: G+
Tool Manufacturer: Sorby |
|
| |
 |
SOLD I.Sorby Drawbore Pin
An old drawbore pin blades marked I.Sorby cast steel. This old drawbore pin has a boxwood handle and brass ferule, handle has the initials ML 429721 printed into handle. This old tool has a few small dents to blade and measures 16 1/2" (420mm) long overall.
Model: n/a
Condition: G+
Tool Manufacturer: I. Sorby |
|
|
| Page
Results: << | < | 1 | PAGE 2 |
| |
|
|
| |
