|
 Page Results: << | < | 1 | PAGE 2 |
3 | 4 | > | >> |
 |
Stanley Carriage Makers Rabbet Plane 10 1/2
Beech handled carriage makers rabbet plane no. 10 1/2 made in England by Stanley. Handles have some slight loss and cracking to the lacquer. Retains a near full length Stanley cutter. A fine woodworking plane with only faint scratches to outer body, inner body still retains an estimated 95%+ of japanning.
Model: 10 1/2
Condition: G++
Tool Manufacturer: Stanley
Delivery: E
Price : £110.00 |
|
| |
 |
SOLD Stanley Router no. 271
A fine little router plane no. 271 made by Stanley. Retains 97% of its nickel plating and includes original Stanley box (box lid is marked with pen).
Model: 271
Condition: F
Tool Manufacturer: Stanley
|
|
| |
 |
Stanley Smoothing Plane no. 4 USA
Rosewood handled smoothing plane no 4, made in USA. Retains a good length Stanley made in USA cutter. Face plate has slight loss of nickel. The inner body of this old woodworking plane maintains an estimated 90% of its japanning. Outer body is marked with light pitting. Nice old Stanley smoothing plane.
Model: 4
Condition: G/G+
Tool Manufacturer: Stanley
Delivery: E
Price : £34.00 |
|
| |
 |
Stanley Side Rabbet Plane no. 79
A fine unused nickel plated side rabbet plane no. 79 made in England by Stanley. Retains two full length Stanley cutters and side fence. This little Stanley woodworking plane is in excellent condition and appears unused. Body maintains an estimated 99% of its nickel plating and comes with the original Stanley box and wax paper.
Model: 79
Condition: F
Tool Manufacturer: Stanley
Delivery: D
Price : £62.00 |
|
| |
 |
Stanley Low Angled Block Plane no. 65
An old low angle adjustable mouth block plane no. 65 made by Stanley. Retains a good length cutting iron marked Stanley made in USA. Body maintains an estimated 70% of japanning. This collectable old block plane has seen a lot of use and is marked with a number of dents and scratches to outer body. Reflected in price.
Model: 65
Condition: G
Tool Manufacturer: Stanley
Delivery: D
Price : £74.00 |
|
| |
 |
Stanley Side Rebate Plane no. 79
An early side rebate plane no. 79 made in USA by Stanley. Retains two near full length cutters both marked Stanley made in USA. A nice old collectable Stanley woodworking plane that maintains an estimated 90% of its nickel plating.
Model: 79
Condition: G+
Tool Manufacturer: Stanley
Delivery: D
Price : £60.00 |
|
| |
 |
Stanley Router Plane no. 271
A fine little nickel plated woodworking router plane no. 271 made by Stanley. Retains 97% of its nickel plating and includes leaflet and original Stanley box.
Model: 271
Condition: F
Tool Manufacturer: Stanley
Delivery: A
Price : £38.00 |
|
| |
 |
Stanley Smoothing Plane no. 4 1/2
Beech handled smoothing plane no. 4 1/2 made in England by Stanley. Retains a good length Stanley cutter. Face plate lacks any nickel plating. Outer body is marked with patches of pitting mainly to sole. Body maintains an estimated 75% of japanning.
Model: 4 1/2
Condition: G
Tool Manufacturer: Stanley
Delivery: E
Price : £25.00 |
|
| |
 |
Stanley Block Plane no. 103
Block plane no. 103 made by Stanley. Retains a good length cutter marked Stanley SW made in USA (sweetheart logo also marked with the letter ‘S’).Sole is marked with a few light scratches. Body maintains an estimated 85% of its finish.
Model: 103
Condition: G/G+
Tool Manufacturer: Stanley
Delivery: A
Price : £32.00 |
|
| |
 |
Stanley Carriage Makers Plane no. 10 1/2
Rosewood handled carriage makers rabbet plane no. 10 1/2 made by Stanley. Retains a good length Stanley cutter. Outer body is marked with patches of pitting mainly to one side of the plane, sole is marked with light scratching. Body maintains an estimated 90% of its japanning, face plate has some slight loss of nickel plating.
Model: 10 1/2
Condition: G/G+
Tool Manufacturer: Stanley
Delivery: E
Price : £92.00 |
|
| |
 |
SOLD Stanley 25c Screwdrivers
Three Stanley no. 25c screwdrivers . These Stanley tools appear to have seen very little use if any includes the original Stanley box.
Overall Length: 222mm (8 3/4")
Model: 25c
Condition: F
Tool Manufacturer: Stanley |
|
| |
 |
SOLD Stanley Smoothing Plane no. 4 1/2
Rosewood handled low knob smoothing plane no. 4 1/2, marked to casting Bailey 4 1/2 PAT’D MAR-25-02, AUG-19-02, APR-19-10. Blade is marked Stanley New Britain Conn USA. Top of blade and cap iron are marked with minor pitting/black staining, can be seen in photo. Outer body is marked with some light pitting/ staining. Inner body maintains an estimated 90% of its japanning.
Model: 4 1/2
Condition: G/G+
Tool Manufacturer: Stanley |
|
| |
 |
SOLD Stanley Trammel Points USA
A pair of 6 1/2" nickel plated trammel points marked Stanley, top adjuster knobs are marked Stanley SW (with sweetheart logo) made in USA, also marked ‘21’ in the body casting to one trammel. These trammels lack the additional attachments/ points…and also one of the locking screws for the additional attachments. These old trammels maintain an estimated 85% of finish.
Model: --
Condition: G
Tool Manufacturer: Stanley |
|
| |
 |
Stanley Jack Plane no 26
Beech transitional jack plane marked to front of plane Bailey Stanley Rule & Level Co no 24. Cutting iron’s marked Stanley 19.92. This old jack plane has a number of dents and scratches and user name stamps to the ends of this woodworking plane. Body maintains an estimated 85-90% of its black japanning.
Plane Length: 382mm (15”)
Plane Width: 67mm (2 5/8”)
Model:26
Condition: G
Tool Manufacturer: Stanley
Delivery: E
Price : £46.00 |
|
|
|
|
| |
| Page Results: << | < | 1 | PAGE 2 |
3 | 4 | > | >> |
|
