|
 Page Results: << | < |
1 | 2 | 3 | PAGE 4 | 5 | > | >> |
|
 |
Stanley Try Square's no 12 (USA)
Two try squares both tools made with cast iron bodies and a steel blades. The smaller square is marked Stanley made in USA no 12, 6 inch, also marked with the sweetheart logo, has some light pitting/ staining to its blade. The larger of the two try squares is also marked Stanley made in USA, no 12, 8 Inch. Both tools sold as collectable items.
Model: 12
Condition: G/G+
Tool Manufacturer: Stanley
Delivery: B
Price : £21.00 |
|
| |
 |
Stanley Fore Plane no 6
Beech handled fore plane no 6, made in England by Stanley. Good length replacement cutting iron marked Record tungsten vanadium steel. Handle and knob have some loss of lacquer mainly to the front knob. Body maintains an estimated 92-94% of black japanning, outer body still maintains much of the original machine marks.
Model: 6
Condition: G+
Tool Manufacturer: Stanley
Delivery: E
Price : £52.00 |
|
| |
 |
Stanley Plough Plane no 13.030
Plastic handled plough plane no 13.030 made by Stanley. Complete with 3 plough cutters, operating instructions and Stanley box. This woodworking plane has seen very little use if any.
Model: 13.030
Condition: F
Tool Manufacturer: Stanley
Delivery: B
Price : £24.00 |
|
| |
 |
Stanley Bailey no 5 Jack Plane
An unused plastic handled jack plane no 5, made by Stanley. Maintains a full length Stanley cutting iron, body retains an estimated 100% of its black japanning plus the original protective coating. Comes complete with the Stanley leaflet and box (box has a large tare to one end).
Model: 5
Condition: F/N
Tool Manufacturer: Stanley
Delivery: E
Price : £42.00 |
|
| |
 |
Stanley Woodworking Plane no 5
Beech handled woodworking plane no 5, made in England by Stanley. Retains a near full length Stanley cutter. Handles retain little of the original lacquer. Body has light pitting/ staining. Inner body maintains an estimated 95%+.
Model: 5
Condition: G+
Tool Manufacturer: Stanley
Delivery: E
Price : £25.00 |
|
| |
 |
Stanley Transitional Jointer Plane no 30
A beech transitional jointer plane, marked to front of plane Stanley Rule & Level Co No 30. Retains a good length cutter marked Stanley New Britain CONN USA. Some of the black enamel appears to of been touched up by its previous user. The wooden body has a few small dents, front knob has four shrinkage cracks. Nice old Stanley Rule & Level woodworking plane.
Sole Width: 78mm (3 1/16”),
Sole Length: 558mm (22”).
Model: 30
Condition: G
Tool Manufacturer: Stanley
Delivery: E
Price : £75.00 |
|
| |
 |
Stanley SW Spirit Level no 1193
A mahogany level with brass fittings marked Stanley SW, Made in USA, No 1193. Has a replacement vertical bubble. This old Stanley Sweetheart level measures 24” (610mm) long overall.
Model: 1193
Condition: G
Tool Manufacturer: Stanley
Delivery: D
Price : £42.00 |
|
| |
 |
SOLD Stanley Corrugated Bedrock no 605 1/2
Rosewood handled bedrock no 605 1/2 made by Stanley with flat sides and a corrugated sole. The inner body of this woodworking plane has been re-japanned by it’s previous user. Body’s marked with US PAT APR-19-10. Stanley blade’s near full length (replacement). A nice old corrugated Stanley Bedrock.
Cutter sharpened on dispatch.
Model: 605 1/2C
Condition: G+
Tool Manufacturer: Stanley |
|
| |
 |
SOLD Stanley Sweetheart Butt Gauge
A nickel plated butt gauge marked Stanley SW, Made in USA, U.S.PAT. No 95 -2-28-11. Maintains an estimated 94-96% of its nickel plating. This little tool’s marked out in inches up to 2” long.
Model: 95
Condition: G+
Tool Manufacturer: Stanley |
|
|
 |
Stanley Fore Plane no 6
Beech handled, thick bodied fore plane no 6, made in England by Stanley Bailey, the planes had a replacement Record cutter fitted with 18mm left to the slot (see photo). Handles retains little of their original lacquer, body maintains an estimated 94 - 95% of its black japanning.
Cutter sharpened on dispatch.
Model: 6
Condition: G/G+
Tool Manufacturer: Stanley
Delivery: E
Price : £49.00 |
|
| |
 |
SOLD Stanley Carriage Makers Rabbet Plane no 10
Carriage makers rabbet plane no 10 by Stanley with low knob.
Handles made from Rosewood. Blades marked Stanley Rule & Level
Co New Britain, CONN. USA. Estimated 96 - 98% japanning intact.
Has small chip to top rear of handle.
Model: 10
Condition: G+
Tool Manufacturer: Stanley
Delivery: E
|
|
| |
 |
Stanley Scraper Plane no 81
Stanley scraper plane no 81, blades marked with the Sweetheart
mark and made in USA. Estimated 92 - 94% nickel plating intact.
Model: no.81
Condition: G+
Tool Manufacturer: Stanley
Delivery: C
Price : £50.00
|
|
|
|
|
| |
| Page Results: << | < |
1 | 2 | 3 | PAGE 4 | 5 | > | >> |
|
