An old Master Craftsman Sandvik saw with a 24" blade and 8 teeth per...
An original part set of skew mouthed, Speight (Leeds) Hollow & Round...
A wide complex moulding plane. Good length blade with clean blade face....
A brass smoothing plane with beech handles.
Flat bottom Stanley no.53 spokeshave, retains original Stanley Conn USA...
Registered ash handled chisel made by Brades & Co. Width: 35mm
3 socketed bevel edged chisels made by Wm.Marples & Sons. Includes:...
Mahogany handled paring chisel made by James Howarth. Width: 36mm
Tinman's mallet and a bossing mallet..
3 ¾” woodcarvers mallet made with a leadwood head and wild mango handle. Has shrinkage crack to head that has been glued to strengthen.
An unused coffin shaped mallet with leadwood head and Wild Mango handle. Head has shrinkage cracks that have been glued to strengthen.
A large unused coffin shaped mallet made with heavy Leadwood head and a strong Wild Mango handle. Head Dimensions: 140mm x 100mm x 71mm (approx).
A large unused coffin shaped mallet made with heavy Leadwood head and a strong Wild Mango handle. Head Dimensions: 140mm x 100mm x 71mm (approx
A 3 3/4" well weighted Leadwood carving mallet with Wild Mango handle. The Leadwood is as the name suggests, a very heavy timber.
A large unused coffin shaped mallet made with Brown Ivory head and a strong Wild Mango handle. Head Dimensions: 140mm x 98mm x 75mm (approx)..
A lovely little strapped hammer stamped ‘Foreign 556’. Face diameter: 12mm, Handle length: 205mm (8”)
A small vintage claw hammer with ash handle. Face diameter: 18mm
Large coffin shaped mallet made with a very heavy Leadwood head and a strong Wild Mango handle. Has a 35mm long hairline shrinkage crack to head, crack has been glued to strengthen.
Ash handled Warrington hammer made by Gilpin.
A lovely claw hammer with bulbous ash handle. Head Length : 95mm (3 ¾”)
A hickory handle hammer made by Brades, dated 1917.
An old cobblers hammer made by George Barnsley. Face diameter: 34mm
A glaziers hammer with beech handle. Head Width: 78mm (3” approx)
A little used creasing, planishing hammer marked W.Whitehouse Atlas Forge, made in England, 1/2lb.
A substantial Gilpin ballpein hammer. The hammer head is marked 'Gilpin, 1984 (ministry arrow), 910-4652, S.S876'.