An old Master Craftsman Sandvik saw with a 24" blade and 8 teeth per...
An original part set of skew mouthed, Speight (Leeds) Hollow & Round...
A wide complex moulding plane. Good length blade with clean blade face....
A brass smoothing plane with beech handles.
Flat bottom Stanley no.53 spokeshave, retains original Stanley Conn USA...
Registered ash handled chisel made by Brades & Co. Width: 35mm
3 socketed bevel edged chisels made by Wm.Marples & Sons. Includes:...
Mahogany handled paring chisel made by James Howarth. Width: 36mm
A large pair of vintage dividers with decorative machining. Overall length: 356mm (14”)
An old pair of dividers marked ‘Lowentraut MFG, made in America, 6, forged, ’. Height: 145mm (approx)
Etalon (Switzerland) Vernier Calipers with measurements up to 210mm.
A 10” tall pair of dividers made by Thewlis & Griffith. Circa late 19th century.
Inside micrometer 250 made by Brown & Sharp. Comes complete with the original case.
Inside micrometer 254 made by Brown & Sharp. Comes complete with the original case.
Micrometer made by Brown & Sharpe. Micrometer is marked ‘25mm to 50mm, 1/100mm, Brown & Sharpe MFG Co Providence RI, USA, 47’. Complete with box and parts seen in photo.
Micrometer made by Brown & Sharpe. Micrometer is marked Brown & Sharpe MFG Co Providence RI, USA, 8, 1/100mm’. Comes with original box.
A small micrometer made by Brown & Sharpe. Has a replacement box, some damage to box. Micrometer is marked ‘1/100mm 8’.
A good clean micrometer 4-5” made by Moore & Wright, Sheffield England. Comes with original wooden box.
A good clean micrometer no,63A made by Brown & Sharpe, also marked 2-3. Comes with wooden box and all parts seen in photo.
A pair of outside calipers made by Starrett USA. Length: 14 ¾”, Jaws Open to: 23”
Vernier callipers made in Sweden by Tuna. Measurements are marked out in inches.
An old pair of dividers marked with a logo of a cat and ball. These dividers can be finely adjusted. Length: 170mm
10” long dividers made by Monument. Length: 250mm
Measuring tools made by Moore and Wright. Includes 1 x dividers that measure 14 ½” long overall. 1 x outside calipers 6 ½” long.
An old pair of dividers. The dividers are marked 'Wynn & Timmins'.
A Japanese made 12” stainless hardened steel Vernier depth gauge made by Mitutoyo. Complete with original case.