An old Master Craftsman Sandvik saw with a 24" blade and 8 teeth per...
An original part set of skew mouthed, Speight (Leeds) Hollow & Round...
A wide complex moulding plane. Good length blade with clean blade face....
A brass smoothing plane with beech handles.
Flat bottom Stanley no.53 spokeshave, retains original Stanley Conn USA...
Registered ash handled chisel made by Brades & Co. Width: 35mm
3 socketed bevel edged chisels made by Wm.Marples & Sons. Includes:...
Mahogany handled paring chisel made by James Howarth. Width: 36mm
Fine mouth bullnose rabbet plane with Norris shaped body and oversized rosewood wedge. Has a short length I.Sorby blade.
Bullnose rabbet plane no.90J made by Stanley. Retains good length Stanley cutter.
A lovely lightly used shoulder rabbet plane no.073 made in England by Record. Retains a near full length Record tungsten steel cutter and the original Record box.
A lightly used bullnose rabbet plane no.077A made in England by Record. Previous user has fitted a thicker Ray Iles blade.
Bullnose rabbet plane no.077A made by Record. Comes complete with nose piece, 2 thin metal shims and Record tungsten steel cutter.
Shoulder rabbet plane no. 073 made by Record. Retains a near full length Record tungsten steel blade. Complete with Record box.
An old Record 073 shoulder rabbet plane in original box.
A small Edward Preston bullnose shoulder plane number 1366.
A little gunmetal bullnose plane with tight mouth and a rosewood wedge. Width: 12mm (1/2”), Sole length: 54mm (2 1/8”)
This old infill bullnose plane with fairly tight mouth and is fitted with an Ibottson blade and an Ebony wedge.
A scarce rosewood handled carriage makers plane M10 made by Marples. Retains a good length blade marked ‘W.Marples & Sons, Sheffield England, solid crucible steel’.
Bullnose rabbet plane Rd 372093 made by Edward Preston. Retains a good length Preston blade.
A fine unused shoulder plane no. 93 by Stanley. Comes complete with original Stanley box.
A rare Record no.074 shoulder plane in excellent condition.
A scarce 1 1/4" wide Edward Preston & Sons no. 1368C shoulder plane, which retains original iron and 70-75% of its finish.