An original part set of skew mouthed, Speight (Leeds) Hollow & Round...
A wide complex moulding plane. Good length blade with clean blade face....
A brass smoothing plane with beech handles.
Flat bottom Stanley no.53 spokeshave, retains original Stanley Conn USA...
Registered ash handled chisel made by Brades & Co. Width: 35mm
3 socketed bevel edged chisels made by Wm.Marples & Sons. Includes:...
Mahogany handled paring chisel made by James Howarth. Width: 36mm
Hardwood handled paring chisel made by Mitchell. Size: 31mm
A good old Wm Marples Parallel Plane Blade. Width: 57.5mm, Thickness: 5mm
A good old Wm Marples Parallel Plane Blade with I Sorby cap iron. Width: 64mm, Thickness: 4mm
A good old I & H Sorby Parallel Plane Blade with the original I & H Sorby cap iron. Width: 64mm, Thickness: 5mm
A Nurse & Co Parallel Plane Blade with an early Nurse makers mark. Width: 54mm, Thickness: 4.75mm
An old cap iron which was typically used on old Wooden jointer planes and infill planes. Supplied with cap iron screw.
An old tapered plane blade with the markings ‘Marples & Sons, Hibernia, Warranted Cast Steel’.
An old thick parallel iron plane blade with I.Sorby markings. Width: 54mm, Thickness: 4mm
An old thick parallel iron plane blade with W.Marples Hibernia markings.
An old cap iron from the old wooden smoothing / jack planes and the old infill smoothing / jack planes. Width: 62mm (2 7/16”)
2 ½” parallel iron faintly marked ‘AM’ also marked with the crown logo. Includes a cap iron.
Unused mini planer blades, 82mm (3 ¼”). Designed to fit Models 1901, 1923 BD.
An old toothing plane made by Aaron Hildick. Blade width: 51mm
A little used 2 3/8 inch high angle frog made by Lie-Nielsen.