Sold Items

An old scarce wooden handled I Sorby hand saw. This old saw has a super medallion which says 'I Sorby, Sheffield' along with the Punch logo. This saw came from a life-long saw collector. TPI: 6 Blade Length: 26”   Condition: blade is straight, all teeth present, saw is reasonably sharp, please se...

Full Product Details

A super example of an old Record 020 compass / circular plane, made in England. This Record 020 still retains a good clear trade label and still has its original box.  For general information about this model of plane, see the Record 020 plane review on FindMyTool.co.uk Condition: all parts worki...

Full Product Details

× PLEASE NOTE: We are only able to send this item to England, Wales, Scotland and Northern Ireland. A super, old decorative William Marples mortice gauge with good clear Marples logo. This is different to most Marples mortice gauges with a different form of quick head locking.   Condition: ple...

Full Product Details

An old small 12" rare Rabone folding caliper rule which we believe to be an old ironmonger rule. We believe this to be an old very rare rule. The side of the rule is marked 'John Rabone & Sons, Manufactas'. This rule is marked out in inches up to 12", along with lots of different measurement ...

Full Product Details

6x old Marples woodwork chisels set. An increasingly rare chance to buy a graduated set of old William Marples bevel edge firmer chisel set consisting of sizes: 1/8", 3/16", 1/4", 1/2", 5/8", 3/4" Each chisel is fitted with its original Marples Boxwood handle, most of which retain their full or p...

Full Product Details

Old Unusual Metal-Workers Hammer. This hammer came from a big collection of panel beater / metal-worker hammers. Head Length: 125mm   Condition: a vertical split either side near head, please see photos for condition.

Full Product Details

Old Unusual Large Metal-Workers Hammer, looks like it is blacksmith made. This hammer came from a big collection of panel beater / metal-worker hammers. Head Length: 240mm   Condition: please see photos for condition.

Full Product Details

4x Old Japanese Chisels in their original handmade Japanese wooden boxes with beautiful hand-written Japanese writing / calligraphy and engraved makers mark. We have little knowledge of old Japanese chisels, our feeling is these are old, early and rare, especially in their original boxes. The chi...

Full Product Details

Old Planecraft Record Tools Book with its dustcover. The books is dedicated to old Record planes and their use. This Planecraft book is signed by one of the authors, E Clifford. We believe it is rare to have the authors signature.   Condition: please see photos for condition

Full Product Details

× PLEASE NOTE: We can only accept orders for England, Wales and Scotland on this item.                 -> More Info A good example for its age of an increasingly scarce early low knob Stanley Jointer Plane No. 8 with corrugated sole (No. 8C). This lovely old Stanley plane has Rosewood hand...

Full Product Details

A super 8-Piece set of old Swedish Bevel Edge Chisels in a heavy, solid wooden fitted box. Sizes: 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1 1/4"   Condition: please see photos for condition.  

Full Product Details

2x Old Antique Ward & Payne G-Clamps 6" Marked 'Ward & Payne, 6"' on one side and 'Sheffield, England' on the other side. These lovely old, very scarce g-clamps date to pre-1920 making them true antique tools. I believe Ward & Payne operated from about the 1850's to I think 1916. A re...

Full Product Details

An old, antique hand saw marked 'Drabble & Sanderson, D, Sheffield, Warranted Cast Steel, Patent Ground'. It is also marked with advertising markings: 'Made Expressly For Byron Hunt, Tool Merchant, 84 King St, Hammersmith W'. This saw is from our collection, a scarce saw in this condition, a ...

Full Product Details

An old, antique, Victorian Sorby hand saw fitted with a hardwood handle. The blade is marked 'I&H Sorby, Sheffield, Cast Steel'. The medallion is marked 'I H Sorby, Sheffield, I H S' along with a crown emblem. This is a very rare saw, even rarer in this condition. This saw dates to at least 1...

Full Product Details

A very old, antique hand saw marked 'Green, Pimlico'. This is a rare saw from a life long collector, a real tangible piece of history. We believe this antique saw is a Victorian saw dating C.1870-1880. TPI: 7 1/2 Blade length: 26"   Condition: blade is straight, all teeth present, feels and looks...

Full Product Details

An old Record 0130 block plane. For general information about this tool see the Record Plane 0130 Review on FindMyTool.co.uk Condition: please see photos for condition.

Full Product Details

A substantial old nibbed Buck rip saw fitted with a hardwood handle, what a beautiful old saw. This saw is extra special as the wooden totes / spurs remain in tact as original which often these elongated totes / spurs are broken off or repaired. This is also the largest rip saw I believe we have ...

Full Product Details

An old Disston Philadelphia rip saw fitted with a beautiful hardwood handle with 'H. Disston & Sons, Philada' medallion. We believe this saw is an old, scarce Centennial Disston No. 76 saw which we believe dates the saw to pre-1920. This old saw retains a faded partial Disston etching. The te...

Full Product Details

An old Disston Philadelphia hand saw no. 8 fitted with a beautiful hardwood handle with 'H. Disston & Sons, Philada' medallion. This nib on this old Disston nibbed saw almost looks like a saw tooth. This old saw retains a faded partial Disston etching. TPI: 6 Blade length: 26 1/2"   Condition...

Full Product Details

A Stanley Low Angle Block Plane No. G12-060, this model was previously known as the no. 60 1/2. Condition: please see photos for condition.

Full Product Details

A good, old Woden W78 fillister rebate plane in its original box.. This plane still retains some of its Woden trade label. For general information about this model of plane, see the Woden W78 plane review on FindMyTool.co.uk Condition:  all parts working smoothly, please see photos for condition.

Full Product Details

An old huge wooden jointer plane.. The plane is fitted with a 'W Biermans, Breda' plane iron and Wm Marples cap iron. The front nose is marked 'J.N' with a crown symbol. Plane Length: 30" Plane Width: 3" Plane Iron Width: 2 1/4"   Condition: please see photos for condition.

Full Product Details

A scarce, old Elliott Lucas "ELECT" Level. This old level has a space age / futuristic feel to it. Retains both bubbles. Length: 9" Condition: bubbles in tact, please see photos for condition.

Full Product Details

Old Whitticase Combination Pocket Level. Overall Length: 9"   Condition: bubble in tact, please see photos for condition

Full Product Details

An old Veritas Invisible Nail Plane - Made In England (most Veritas tools are made in Canada). If I remember correctly the plane is used by lifting a half shaving, apply the nail underneath the half lifted shaving and then glue the shaving back down to make the nail invisible.   Condition: please...

Full Product Details

× PLEASE NOTE: We can only accept orders for England, Wales and Scotland on this item.                 -> More Info  A lovely old Millers Falls jack plane no. 15, Made In USA. This increasingly harder to find plane is fitted with a 'Stanley, Made In England' cutter.   Condition: all parts m...

Full Product Details

× PLEASE NOTE: We can only accept orders for England, Wales and Scotland on this item.                 -> More Info A Rosewood handled combination plane no. 50 made by Stanley. For general information about this model of plane, see the Stanley 50 plane review on FindMyTool.co.uk   Conditio...

Full Product Details

× PLEASE NOTE: We can only accept orders for England, Wales and Scotland on this item.                 -> More Info A nice old Record 405 multi-plane, made in England. Comes with original box. Includes 2x short arms, 2x long arms, 2x depth stops, cam steady, box of cutters. For more genera...

Full Product Details