Small Valvespout Oil Can + Free Collectable Alfa Oilcan
Other Tools
£25.00
Small Valvespout Oil Can + Free Collectable Alfa Oilcan (damaged - see condition guide).
Two lovely little oilcans including a Valvespout in a stunning blue and an attractive Alfa can.
Length (with spout): 78mm - 120mm approx.
Condition: the Alfa oil can is sold as a collectable due to the sp...
An old Braime's Oilcan.
The brass lid says 'Braime's, Double Slide, Grit Excluder Feed Hole'.
Underneath says 'No 08, 1/?P'.
Length (with spout): 250mm approx.
Condition: spout tip crushed a bit, please see photos for condition.
An old Braime Oilcan.
The brass plate says 'Braime, Made In England'.
Underneath says 'No ....5, 1/2P'.
Length (with spout): 320mm approx.
Condition: some denting, please see photos for condition.
An old Lubricating Oil Oilcan.
Very worn advertising which says 'Super...., Lubricating Oil, Special Prepared, For Cycles Etc.'
Height (with spout): 190mm approx.
Condition: please see photos for condition.
An old small Kayes oilcan / 'K' oil can.
The side of the oilcan is marked 'K'.
Overall Length (from spout tip to handle): 210mm approx.
Condition: please see photos for condition.
An old HOC Excelene Highly Refined Lubricating Oil Oilcan.
'Manufactured by The Humber Oil Co Ltd, Marfleet, Hull'
Height: 70mm approx.
Condition: please see photos for condition.
An old HOC Excelene Highly Refined Lubricating Oil Oilcan.
'Manufactured by The Humber Oil Co Ltd, Marfleet, Hull'
Height: 70mm approx.
Condition: please see photos for condition.
An old HOC Excelene Highly Refined Lubricating Oil Oilcan.
'Manufactured by The Humber Oil Co Ltd, Marfleet, Hull'
Height: 70mm approx.
Condition: please see photos for condition.
An old scarce miniature Kayes oilcan.
The side of the oilcan is lightly marked 'K'.
Overall Length (from spout tip to handle): mm approx.
Condition: please see photos for condition.
A vintage yellow oil jug.
Marked 'Quart', 'Speedo Quart Measure', Pat No 319485 and a worn makers mark.
Height: 8" approx.
Condition: please see photos for condition.
An old Vesta Oil Can & Banjo Oil Can.
Condition: the 'Vesta' oilcan has a hole punctured in top third (can just about be seen to the left of the first photo), please see photos for condition.
An old HOC Excelene Highly Refined Lubricating Oil Oilcan.
'Manufactured by The Humber Oil Co Ltd, Marfleet, Hull'
Height: 70mm approx.
Condition: please see photos for condition.
An old Braimes oilcan.
The bottom of the oil can is marked 'B2 1/2 Pt, R'.
The brass lid is marked 'Braimes, Forced Feed, Grit Excluder Feed Hole'.
Overall Length (from spout tip to handle): 330mm approx.
Condition: please see photos for condition.
A nice old Mac Stan oilcan.
The side is marked with makers mark 'Made In England, Mac Stan, Pat No's 188591-22, 107166-16'.
Overall Length (from spout tip to handle): 14" approx.
Condition: please see photos for condition.
An old oilcan.
This old oil can seems unusual in that it has a giant plug / bung to secure the can.
Overall Length (from spout tip to handle): 9 1/2" approx.
Condition: please see photos for condition.