Other Spare Parts
24 items found in Other Spare Parts
Wm.Marples Tapered Plane Iron – 50mm
planes
- £18.00
Tapered plane iron made by Wm. Marples & Sons, Sheffield England. Blade width: 50.5mm Thickness: 4.5mm Condition: has chip from blade, please see photos for condition.
Salmen Blade – 2 ¼”
planes
- £15.00
2 ¼” wide parallel blade iron made by Salmen, Master Brand. Blade width: 56.5mm (2 ¼”), Thickness: 4mm Condition: please see photos for condition.
Ward Parallel Iron - 54mm
planes
- £34.00
An old Ward parallel iron. Plane Iron Width: 54mm Condition: please see photos for condition.
I Sorby Parallel Plane Iron - 2 1/4"
planes
- £25.00
An old I Sorby Parallel Plane Iron Width: 2 1/4" (57mm) Condition: top off plane iron is burred a bit, part of the makers name is worn, mainly minor/light pitting to cutting face, please see photos for condition.
No. 3 Plane Blade (by Tyzack) - 43mm
planes
- £12.50
Plane Blade to fit no.3 smoothing planes such as the Stanley No. 3 and Record 03 planes. This blade is made by W. Tyzack Sons & Turner, Sheffield. More than one available. Width: 43mm Condition: blades may have a small amount of black staining / minor pitting, please see photos for condition.
8 John Moseley And Marples Plough Irons
planes
- £42.00
A collection of mainly John Moseley & Son plough irons. Includes: Iron numbers 1, 2, 5, 6, 7 and 8 by John Moseley & Son. Irons 2 and 3 to complete a made set are by Wm. Marples & Sons. Condition: please see photos for condition.
Wm Marples Parallel Plane Blade - 57.5mm
planes
- £29.00
A good old Wm Marples Parallel Plane Blade. Width: 57.5mm, Thickness: 5mm Condition: partial makers stamp, please see photos for condition. partial makers stamp, please see photos for condition.
Wm Marples Parallel Plane Blade (and Cap Iron) - 64mm
planes
- £35.00
A good old Wm Marples Parallel Plane Blade with I Sorby cap iron. Width: 64mm, Thickness: 4mm Condition: partial makers stamp, please see photos for condition.
Early Nurse & Co Parallel Plane Blade - 54mm
planes
- £34.00
A Nurse & Co Parallel Plane Blade with an early Nurse makers mark. Width: 54mm, Thickness: 4.75mm Condition: please see photos for condition.
Cap Iron (and Screw) – 64mm
planes
- £8.00
An old cap iron which was typically used on old Wooden jointer planes and infill planes. Supplied with cap iron screw. Condition: this photo is a general photo, you will receive a similar item, there may be a scattering of black staining/light pitting.
Marples Plane Iron – 64mm
planes
- £18.00
An old tapered plane blade with the markings ‘Marples & Sons, Hibernia, Warranted Cast Steel’. Blade Width: 64mm Condition: small scattering of black staining/light pitting to cutter face, please see photos for condition.
I Sorby Parallel Iron Plane Blade – 54mm
planes
- £29.00
An old thick parallel iron plane blade with I.Sorby markings. Width: 54mm, Thickness: 4mm Condition: some black staining and a tiny bit of mainly light pitting on cutting face, cutting edge has a tiny chip which can only really be seen on the bevelled side, please see photos for condition.
Wm Marples Parallel Iron Plane Blade – 57mm
planes
- £26.00
An old thick parallel iron plane blade with W.Marples Hibernia markings. Width: 57mm (2 1/4” approx.) Blade thickness: 5mm Condition: some black staining and light-medium pitting on cutting face, please see photos for condition.
Old Cap Iron – 62mm
planes
- £7.50
An old cap iron from the old wooden smoothing / jack planes and the old infill smoothing / jack planes. Width: 62mm (2 7/16”). Also includes the screw. Width: 62mm (2 7/16”) Note: this photo is a general photo, the item will not be exactly the same but will be similar. Condition: will be clea...
Parallel Iron | 63mm
planes
- £30.00
2 ½” parallel iron faintly marked ‘AM’ also marked with the crown logo. Includes a cap iron. Width: 63mm (2 ½”) Blade thickness: 4mm Condition: good clean blade face, see photographs for condition.
Lie Nielsen High Angle Frog 2 3/8”
planes
- £55.00
A little used 2 3/8 inch high angle frog made by Lie-Nielsen. Frog is a York Pitch 50 degree. Comes complete with the original box. This frog will fit planes with 60mm(2.3/8") blades. Condition: little used, see photographs for condition.
Wm Marples & Sons Parallel Plane Iron
planes
- £33.00
A parallel plane iron marked 'W Marples & Sons, Hibernia, Warranted Cast Steel'. There is a large amount of blade left with 59mm to slot. Includes a cap iron not original to the Marples blade.Blade width: 56mmBlade thickness: 4mm
Wm Marples & Sons Parallel Iron - 57mm
planes
- £26.00
A parallel plane iron marked 'W. Marples & Sons Hibernia, T, Sheffield'. Blade has some pitting spots and black staining close to cutting edge of blade (see photo). Comes with cap iron. Width: 57mm parallel iron thickness: 4mm
Aaron Hildick Parallel Plane Iron | 57mm
planes
- £43.00
A parallel plane iron marked Aaron Hildick, Warranted, Cast Steel.Blade width: 57mmThickness: 4.5mm
Entwistle Shoulder Plane Iron
planes
- £35.00
Little used shoulder plane iron we believe the iron was made by Entwistle. Width: 38mm (1 1/2")Thickness: 3.5mmLength: 221mm (8 11/16")
Entwistle Mitre Plane Iron
planes
- £33.00
A fine mitre plane iron made by Entwistle. Width: 57mm (2 1/4" approx)Thickness: 4.5mmLength: 255mm (10" approx)
Peugeot Freres Plane Blade
planes
- £16.00
An unused plane blade made by Peugeot Freres.Blade width: 40mmThickness: 2mm
ECE Plane blade with Chip Breaker
planes
- £11.00
Unused ECE plane blade with chip breaker. Please select size from drop down menu.Please note: photograph may differ very slightly from actual item.
