Mortice Gauge & Small Square - ENGLAND, WALES, SCOTLAND ONLY
measuring tools
£35.00
× PLEASE NOTE: We can only accept orders for England, Wales and Scotland on this item. -> More Info
A nice old Rosewood mortice gauge with an overstamped makers mark which I think is 'R Melhuish, London'.
And
A lovely old small 3" Ebony try square.
Condition: please see p...
An old Rabone Chesterman try square no 1905 that has a blade measured in inches to 6".
The blade is marked 'Rabone Chesterman, Made In England, No 1905'.
Condition: please see photos for condition.
Unusual Bevel Tool - ENGLAND, WALES, SCOTLAND ONLY
measuring tools
£50.00
× PLEASE NOTE: We can only accept orders for England, Wales and Scotland on this item. -> More Info
An unusual tool with a feel of good quality.
We are not sure what this tool was designed for, possibly a naval link?
Length (when open): 3ft (915mm)
Condition: please see ...
Old Sorby Mitre Square - 8" - ENGLAND, WALES, SCOTLAND ONLY
measuring tools
£19.00
× PLEASE NOTE: We can only accept orders for England, Wales and Scotland on this item. -> More Info
An old Robert Sorby mitre square with Rosewwod stock.
There are remnants of the trade label which allows identification to Robery Sorby Kangaroo brand.
Condition: pitting t...
Old Small Try Square - 3" - ENGLAND, WALES, SCOTLAND ONLY
measuring tools
£12.00
× PLEASE NOTE: We can only accept orders for England, Wales and Scotland on this item. -> More Info
An old small try square with a hardwood stock with thick brass inner edge, brass decorative inlay set in old deep, dark Rosewood verging on looking like Ebony.
Condition: p...
An old metal try square with mitre angle stock.
The stock has 'W' on one side.
Full length of blade is 200mm
Condition: please see photos for condition.
Large Try Square and Gauges (Beech, Mahogany, Walnut)
measuring tools
£65.00
A Joseph Marples Large Try Square - 18" (Walnut), a panel gauge and two different sized marking gauges.
Condition: all parts working smoothly, please see photos for condition.
An old Stanley Eureka Flush Sliding T Bevel, made in USA.
This I believe was the smallest version made and from what we have observed it is a much scarcer version.
Marked 'Pat'd 7-14-08'
Blade Length: 5 3/4 approx.
For general info about this tool, see the Stanley Sliding Bevel No. 18 review on F...
Old W Straw Try Square - 12" - ENGLAND, WALES, SCOTLAND ONLY
measuring tools
£35.00
× PLEASE NOTE: We can only accept orders for England, Wales and Scotland on this item. -> More Info
A lovely, old, W. Straw try square with a hardwood stock with thick brass inner edge, brass decorative inlay set in old Rosewood.
The stock is marked with the makers mark: '...
Old I Sorby Try Square - ENGLAND, WALES, SCOTLAND ONLY
measuring tools
£35.00
× PLEASE NOTE: We can only accept orders for England, Wales and Scotland on this item. -> More Info
A lovely old I. Sorby try square.
The blade is marked 'I. Sorby, Sheffield, England' along with the Punch logo.
The stock is marked 'I Sorby'.
Blade length: 12" to stock, 14...
Buck Try Square and Sliding Bevel - ENGLAND, WALES, SCOTLAND ONLY
measuring tools
£50.00
× PLEASE NOTE: We can only accept orders for England, Wales and Scotland on this item. -> More Info
An old Buck try square and an old Buck sliding bevel both with the same previous owner name on them.
The sliding bevel is marked 'Buck, Tot Court Rd'.
The sliding bevel blade...
An old mitre template and saddle square.
The mitre template has small pieces of the trade label remaining, not enough to make our who the maker was.
Condition: please see photos for condition.
Old Mitre Square 9 3/4" - ENGLAND, WALES, SCOTLAND ONLY
measuring tools
£19.00
× PLEASE NOTE: We can only accept orders for England, Wales and Scotland on this item. -> More Info
An old mitre square with brass decorative inlay set in old deep, dark Rosewood.
A real tactile tool.
An environmentally friendly, low carbon tool made in the UK generations ...
Old Square and Sliding Bevel - ENGLAND, WALES, SCOTLAND ONLY
measuring tools
£32.00
× PLEASE NOTE: We can only accept orders for England, Wales and Scotland on this item. -> More Info
An old Rosewood try square- 12"
An old Rosewood sliding bevel with 12" blade.
Condition: sliding bevel has some screw holes in brass section on rear side, please see photos ...
An Old Medieval Looking Try Square.
This square we believe in fact dates to the 1870's, it looks like it is a Stanley try square no. 2 with a blade marked with very hard to make out measurements to 10".
The stock has been rivetted at some point in its long history which gives it a very old look.
...
Old Stanley Square No. 20 - ENGLAND, WALES, SCOTLAND ONLY
measuring tools
£25.00
× PLEASE NOTE: We can only accept orders for England, Wales and Scotland on this item. -> More Info
An old Stanley try square no. 20 with Rosewood stock and 6 inch blade.
The blade is marked 'Stanley, Pat 12 29 96' dating this square to the late 1890's - early 1900's.
For ...
Old Try Square - 12" - ENGLAND, WALES, SCOTLAND ONLY
measuring tools
£39.00
× PLEASE NOTE: We can only accept orders for England, Wales and Scotland on this item. -> More Info
A lovely, old try square with a hardwood stock with thick brass inner edge, brass decorative inlay set in old deep, dark Rosewood verging on looking like Ebony.
The stock is...
2x Stanley Sliding Bevels No. 5025 - 10 1/2"
For general info about these tools, see the Stanley Sliding Bevel No. 5025 review on FindMyTool.co.uk
Condition: please see photos for condition.
Old Mitre Square - 9 3/4" - ENGLAND, WALES, SCOTLAND ONLY
measuring tools
£39.00
× PLEASE NOTE: We can only accept orders for England, Wales and Scotland on this item. -> More Info
A lovely, old mitre square with a hardwood stock with thick brass edges, brass decorative inlay set in old deep, dark Rosewood.
A real tactile tool.
An environmentally frien...
× PLEASE NOTE: We can only accept orders for England, Wales and Scotland on this item. -> More Info
A super, old I Sorby mitre square with a hardwood stock with thick brass edges, brass decorative inlay set in old deep, dark Rosewood which verges on looking like Ebony.
The...
An old metal Stanley try square no. 12 with a blade marked with measurements to 6".
The stock is marked ' Stanley' and 'Made In USA'.
For general info about this square see the FindMyTool.co.uk Stanley Square No. 12 review
Condition: very slight gradual bend through the length of the blade, plea...
Old Stanley Rosewood Try Square - ENGLAND, WALES, SCOTLAND ONLY
measuring tools
£25.00
× PLEASE NOTE: We can only accept orders for England, Wales and Scotland on this item. -> More Info
A nice old Rosewood handled Stanley 'Sweetheart' try square.
The blade is marked on both sides with inches. The blade is also marked 'Stanley, SW, Made In USA'.
For general ...
Combination set made in Sheffield England. Retains intact bubbles, lacks marking pin. Rule is marked out in inches up to 12” long.
Condition: all parts working smoothly, please see photos for condition.