Sold Items
800 items found in Sold Items
SOLD - Mathieson Hand Saw – 26”- 5tpi (Beech)
Saws
- £0.00
A nice, old Mathieson crosscut hand saw, fitted with a hardwood handle. The medallion is marked 'Alex Mathieson & Son, Glasgow & Edinburgh'. The blade etching says 'Alex Mathieson & Son, Glasgow & Edinburgh, Cast Steel, Warranted'. TPI: 5" Blade length: 26" Condition: the blade...
SOLD - Old Ornate Rabone Spirit Level – 24 inch
measuring tools
- £0.00
A lovely, ornate Rabone spirit level. This 24" long level has the nice touch of coming in a wooden fitted box. The brass plate is marked 'J Rabone & Sons, Made In England, Warranted Correct'. Retains all three clear bubbles. Condition: pitting marks to body, please see photos for condition.
SOLD - Old Stanley Compass Plane No. 20
planes
- £0.00
An old Stanley compass plane no. 20 The Stanley plane iron and the lateral adjuster lever are both marked with Patents. The lady who sold us this plane said the plane belonged to her father who had quite a history of work including carrying out some work on Buckingham Palace. For general informat...
SOLD - Stanley Scraper Plane No. 12
planes
- £0.00
× PLEASE NOTE: We can only accept orders for England, Wales and Scotland on this item. -> More Info A Rosewood handled Stanley scraper plane no. 12. This Stanley scraper plane appears to have the original Stanley scraper. For general info about this tool, please see the Fi...
SOLD - Boxed Oilstone Sharpening Stone - ENGLAND, WALES, SCOTLAND ONLY
chisels
- £0.00
× PLEASE NOTE: We can only accept orders for England, Wales and Scotland on this item. -> More Info An old sharpening stone housed in a super hardwood box which we believe is made from Rosewood. Feels like a medium grit, probably 1000g. Stone Length: 9" Condition: please ...
SOLD - 5x Addis Woodcarving Tools Set (Ash)
chisels
- £0.00
5x Addis woodcarving tools set, carvers include: 1 x 3.5mm - sweep 18 - curved - deep gouge 1 x 25mm (1") - curved - medium gouge 1 x 5mm - sweep 30 - spoon - deep gouge 1 x 10mm (3/8") - sweep 30 - spoon - deep gouge 1 x 12.5mm (1/2") - sweep 30 - spoon - deep gouge: edge is a bit wavey Condit...
SOLD - Small John Rabone Tape Measure
measuring tools
- £0.00
A super, very little John Rabone retractable tape measure. This old collectable tape measure has a steel tape. The side of the tape case is marked 'John Rabone & Sons, Birmingham, England'. Press the button on the rear to retract the tape. Case Diameter: 34mm Condition: please see photos for ...
SOLD - Old Edward Preston Brass Mitre Template
measuring tools
- £0.00
An old Edward Preston brass mitre template. Condition: chip to one corner, please see photos for condition.
SOLD - Hale Brothers Mortice Chisel – 1/4" (Ash)
CHISELS
- £0.00
Hale Brothers Mortice Chisel, fitted with Ash handle. This old chisel has the nice touch it still retains the old Hale Brothers trade label on the handle. Width: 1/4" approx. Overall length: 10" Condition: please see photos for condition.
SOLD - Record Plough Plane No. 044
Other Tools
- £0.00
An old Record 044 Plough Plane, made in England. This old Record 044 plane is supplied in its original box with both long and short arms, depth stop and all 8 plough cutters. It also has a very tatty 'How To Get The Best Use from Record Planes' leaflet. For general information about this model of...
SOLD - Norris Dovetailed Shoulder Plane - ENGLAND, WALES, SCOTLAND ONLY
planes
- £0.00
× PLEASE NOTE: We can only accept orders for England, Wales and Scotland on this item. -> More Info A nice old 1 1/4" wide dovetailed Norris shoulder plane made by Norris, London. The plane has Rosewood infills and wedge and a good length replacement snecked cutter. Body, ...
SOLD - Norris Dovetailed Shoulder Plane No. 7 - ENGLAND, WALES, SCOTLAND ONLY
planes
- £0.00
× PLEASE NOTE: We can only accept orders for England, Wales and Scotland on this item. -> More Info A Norris No. 7 dovetailed shoulder plane with Rosewood infills and a fine mouth. Has a good length unnamed snecked iron, front side of iron is marked with patches of pitting...
SOLD - Norris A5 Smoothing Plane (Beech)
planes
- £0.00
An old Norris plane no. A5. This post war Norris of London coffin shaped A5 smoothing plane has ebonised beech infills, a good length Norris parallel cutting iron with 41mm of blade left to slot. The lever cap and brass knurled blade adjusting knob are also marked Norris London. For general infor...
SOLD - Stanley Corner Rounding Plane No. 144 - 1/2"
planes
- £0.00
An old Stanley 144 plane. This old, increasingly scarce Stanley corner rounding plane no. 144 was made in USA. This was Stanley's earliest model with the Patent Applied for mark. Retains a good length blade marked 'Stanley SW New Britain Conn USA'. A good clean plane especially of its age, retain...
SOLD - 4x London Pattern Boxwood Chisel Handles
chisels
- £0.00
4x unused London Pattern Boxwood chisel handles. 3x Ferrule Size: 12.5mm (1/2") 1x Ferrule Size: 16mm (5/8") For a wide range of replacement chisel handles and replacement ferrules please visit toolnut.co.uk: Toolnut.co.uk stock a wide range of replacement chisel handles & brass ferrules, ple...
SOLD - Stanley Block Plane No. 220
planes
- £0.00
An old Stanley block plane no. 220 in its original box. For general information about this tool see the Stanley 220 Plane Review on FindMyTool.co.uk Condition: all parts move freely, please see photos for condition.
SOLD - Wm Marples Wooden Hollow and Rounds Planes - Half Set (Beech)
planes
- £0.00
A good Hibernia, Wm Marples half set of wooden hollow and round planes consisting of the pairs 2, 4, 6, 8, 10, 12, 14, 16 and 18. Condition: two wedges look like they have been replaced, please see photos for condition.
SOLD - Moore & Wright Scraper Set
Other Tools
- £0.00
A Moore & Wright Scraper Set in its original box 'Moore & Wright, Sheffield, England'. I believe these are Moore & Wright Bearing Scrapers. Two of the tools are unused with their wax coating still intact, the third tool probably has had minimal use. Condition: in as found condition, p...
SOLD - Drabble & Sanderson Dovetail Saw - 8" - 14tpi (Beech)
Other Tools
- £0.00
A super, old Drabble & Sanderson dovetail saw with open handle and brass spine. This old brass back dovetail saw is marked on the spine 'Drabble & Sanderson, London' and 'Best Steel, Warrented'. The person who sold us this saw said the tool belonged to his grandad who was 'Leslie George H...
SOLD - Old Engineers Chest Toolbox
Other Tools
- £0.00
* UK orders only on this item A nice old engineers toolbox / chest made from hardwood. The front panel doesn't have a lock. Condition: please see photos for condition.
SOLD - Edward Preston Universal Handle (Boxwood)
Other Tools
- £0.00
A small old Edward Preston tool handle that measures 95mm long. Condition: please see photos for condition.
SOLD - Old LSS Combination Square No. 4 - 12"
measuring tools
- £0.00
An old metal LSS combi square with a blade marked with measurements to 12". The blade is marked 'The L.S.S. Co., Athol Mass USA' and 'No. 4'. The stock has an intact bubble. Condition: please see photos for condition.
SOLD - Old J Rabone Combination Square No. 1901 - 12"
measuring tools
- £0.00
An old metal Rabone combi square with a blade marked with measurements to 12". The stock is marked 'Rabone', the blade is marked 'J Rabone & Sons, Birmingham, Made In England' and 'No. 1901'. For general info about this square see the FindMyTool.co.uk Rabone Square No. 1901 review Condition:...
SOLD - Buck & Hickman (London) Caliper Rule (Boxwood)
measuring tools
- £0.00
A super old Buck & Hickman caliper rule made from Boxwood and brass. This old caliper rule is marked 'Buck & Hickman, London' along with many measurements on both sides of the rule inc. 'wire', 'rope', 'hemp', 'chain' and many more. Condition: please see photos for condition.
SOLD - Record Small Plough Plane no. 043
Other Tools
- £0.00
A small Record 043 plough plane, made in England by Record. This Record 043 comes in its original box with 3 plough cutters. Condition: box is a bitty tatty/grubby, please see photos for condition.
SOLD - Record Bullnose Plane No. 077
planes
- £0.00
An old, early Record 077 Bullnose rabbet plane. The securing arm is marked 'Record, British'. Fitted with an Edward Preston plane cutter (this could be original to the plane). For general info about this tool, please see the FindMyTool.co.uk Record 077 plane review. Condition: all parts workin...
SOLD - Mathieson Swan Neck Mortice Chisel - 1/2 Inch (Beech)
chisels
- £0.00
A supper, old large swan neck mortice chisel. This old swan neck mortice chisel has the makers mark 'Mathieson, Glasgow'. Blade Width: 12mm (1/2") approx. Condition: please see photographs for condition.
SOLD - Marples Jointer Plane No. 7 / M7
planes
- £0.00
× PLEASE NOTE: We can only accept orders for England, Wales and Scotland on this item. -> More Info An old quite rare Marples Jointer Plane No. M7 (no. 7) fitted with W Marples plane cutter, Rosewood rear handle and front knob (the rear handle is a non-original replacement...