Sold Items
852 items found in Sold Items
SOLD - Joseph Marples Mortice Gauge
measuring tools
- £0.00
× PLEASE NOTE: We can only accept orders for England, Wales and Scotland on this item. -> More Info A Joseph Marples Rosewood mortice and marking gauge. Condition: please see photos for condition. [X] PLEASE NOTE: We are only able to accept orders for England, Wales ...
SOLD - Old Rounder / Dowel Tool
Other Tools
- £0.00
An old rounder tool / dowel tool. Fits into a brace n bits drill. Think I recall this tool dates to about 1920's. Condition: please see photos for condition.
SOLD - Veritas Small Bevel-Up Smoothing Plane with PM-V11 Iron
planes
- £0.00
A super Veritas Small Bevel-Up Smoothing Plane with PM-V11 plane iron. Condition: like new, all parts move freely, a tiny bit of marking to sole, please see photos for condition.
SOLD - Old Rabone Try Square No. 1915 - 6"
measuring tools
- £0.00
An old, super Rabone Try Square No. 1915 - 6". We believe this Rabone Sqaure to be a scarce square and even rarer in this great condition for its age. The stock is marked 'Rabone, Made In England, No 1915, Patent Pending'. Condition: tiny, tiny curve through the length, please see photos for co...
SOLD - Old Swedish Anchor Fore Plane No. 6 (Beech)
planes
- £0.00
A nice old Anchor fore plane no. 6, Made In Sweden, fitted with hardwood handles. We believe this to be quite a scarce plane. This plane is equipped with an 'Anchor' lever cap, a Sweden 'Erik Anton Berg' plane iron and back iron. The plane iron and back iron have a fish logo. This plane looks sim...
SOLD - Old Small Rabone Inter-Flex Tape Measure
measuring tools
- £0.00
An old Small Push-Pull John Rabone Inter-Flex Tape Measure. Condition: scratching to case, please see photos for condition.
SOLD - Old Starrett Pin Vices & Screwdrivers
Other Tools
- £0.00
× PLEASE NOTE: We can only accept orders for England, Wales and Scotland on this item. -> More Info 2x lovely old Starrett Pin Vices and 2x lovely old Starrett Screwdrivers. The handles look like Ebony but I believe they are made from something different. Three of the too...
SOLD - Moseley Wooden Bead and Scotia Plane (Beech)
planes
- £0.00
A lovely old Moseley bead and scotia wooden moulding plane. The plane is marked on the front nose 'John Moseley & Son, 54-55 Broad St, Bloomsbury, London'. Plane Width: 53mm Cutter Width: 38mm (1 1/2") Condition: all parts move freely, please see photos for condition.
SOLD - Stanley Edge Trimming Plane No. 95
planes
- £0.00
An old Stanley 95 plane with a brass user-made block attachment. This old, increasingly scarce Stanley edge trimming plane was made in USA. This was Stanley's earliest model with the Patent mark. Retains a good length blade marked 'Stanley Rule & Level Co, New Britain Conn USA'. A good clean ...
SOLD - Old Keyzor & Bendon (London) Wooden Rule - 24" (Boxwood)
measuring tools
- £0.00
An old scarce Keyzor & Bendon imperial 24" Folding Rule. This old Keyzor & Bendon rule is marked 'Keyzor & Bendon, London, Best Box'. Condition: please see photos for condition.
SOLD - Small LSS Starrett Combination Square - 15cm (USA)
measuring tools
- £0.00
An old, small Starrett Adjustable Square with metric 15cm rule. The rule is marked 'The LS Starrett Co Co, Athol, Mass, USA, Hardened'. Stock Height: 2 3/4" Condition: all parts working smoothly, bubble intact, please see photos for condition.
SOLD - Record Plough Plane No. 044C
Other Tools
- £0.00
An old Record Plough Plane No. 044C, made in England. Comes with depth stop and 9x Record plough cutters + 4 other cutters which the previous owner had with the plane.. For general information about this model of plane, see the Record 044C plane review on FindMyTool.co.uk Condition: please see p...
SOLD - Wooden Tongue and Groove Plane (Beech)
planes
- £0.00
An old wooden tongue and groove plane. The rear is marked '3/8'. Groove Width: 4.5mm Groove Blade Width: 4mm Tongue Blade Gap Width: 4mm Condition: all parts move freely, please see photos for condition.
SOLD - Record Jack Plane No. 05 1/2 (Beech)
planes
- £0.00
An old Record Jack Plane No. 05 1/2 + additional full Stanley cutter (not shown in photos). For general information about this tool see the Record 05 1/2 Plane Review on FindMyTool.co.uk Condition: all parts move freely, the original cutter is short, please see photos for condition.
SOLD - Adjustable Square Stock With Angle Attachment
measuring tools
- £0.00
A lovely old adjustable Square Stock with an angle rule attachment. The stock has a bubble. Rule says 'Cutting Angle Of Countersink For Machine Screws' and 'Cutting Angle Of Drill' Stock Height: 88mm (3 1/2") This tool came from an old engineer, a lot of his tools appear to date to 1910's-1930's ...
SOLD - Small Moore & Wright Adjustable Square - 4" + Attachments (UK)
measuring tools
- £0.00
A lovely old little Moore & Wright Adjustable Square + attachments. Rule and angle attachments. Rule is marked out in inches up to 4” long. The stock is marked 'Moore & Wright, England, Sheffield, Hardened No 414'. Stock Height: 62mm This tool came from an old engineer, a lot of his tools...
SOLD - Small Brown & Sharpe Adjustable Square - 2 1/4" + Attachments (USA)
measuring tools
- £0.00
A lovely old little Brown & Sharpe Adjustable Square + attachments. Rules and angle attachment, 2 1/4” long. Rules are marked out in inches up to 2 1/4” long. The stock is marked 'Brown & Sharpe MFG Co, Providence, RI USA, BS Trade Mark, 554, Patent Pending'. Stock Height: 38mm This tool ...
SOLD - Old Small Lufkin Steel Rule No. 2707 - 4" (USA)
measuring tools
- £0.00
An Old Small Lufkin Steel Rule No. 2707 - 4" (USA) Marked 'No 2707, The Lufkin Rule Co, Saginaw, USA'. The rule is marked with a multitude of measurement markings with many different increments including some ultra fine increments. These tools came from an old engineer and his father before him, ...
SOLD - 2x Vandervell & Co Vee Blocks + 1x Clamp (London, UK)
Other Tools
- £0.00
2x Vandervell & Co Vee Blocks + 1x Clamp Marked 'CA Vandervell & Co Ld, London'. Dimension: 1 1/4" (32mm) x 1 1/4" (32mm) x 1 1/4" (32mm) Vandervell seems to be an old tool / parts makers for the motor industry. These tools came from an old engineer and his father before him, nearly all h...
SOLD - Old Starrett Dividers - 6 1/2" (USA)
measuring tools
- £0.00
Old Starrett Dividers - 6 1/2" These dividers have a moveable / removable spike which can be set to a different height or replaced with a pencil. Marked 'The LS Starrett Co, Athol, Mass, USA'. These tools came from an old engineer and his father before him, nearly all his tools have dated to 1910...
SOLD - Old Brown & Sharpe Interchangeable Spring Dividers (USA)
measuring tools
- £0.00
Old Brown & Sharpe Interchangeable Spring Dividers Comes with three sets of tips. These tools came from an old engineer and his father before him, nearly all his tools have dated to 1910's - 1930's (not 100% on date - in super condition) Overall Height Of Tallest: 11 1/2" (depending on tips) ...
SOLD - 3x Old Stanley Screwdrivers - 1 1/2" - 10" (Beech)
Other Tools
- £0.00
3x Old Stanley Screwdrivers: Stanely Sweetheart Screwdriver - 10" - 'Stanely, SW, Made In USA, Hurwood' - this screwdriver has a very good, clean, complete 'Stanley' marking on the handle which isn't shown in the photos. Stanely Sweetheart Screwdriver No 215 - 4" - 'No 215, Stanely, SW, Made In U...
SOLD - Old Heavy Duty 'Red Devil' Screwdriver No 1418 - 5 1/4" (Beech)
Other Tools
- £0.00
An old, super, heavy duty screwdriver, marked 'Red Devil, No. 1418'. Blade Length (to ferrule): 5 1/4" (7" with ferrule) Tip Width: 16mm (5/8") These tools came from an old engineer and his father before him, nearly all his tools have dated to 1910's - 1930's (I haven't researched the date of t...
SOLD - Old Stanley Level No. 313 - 24" + Brown & Sharpe Rule (USA)
measuring tools
- £0.00
Old Stanley Level No. 313 - 24" (USA) in a fitted wooden box with green baise lining. and Brown & Sharpe Rule - 24" (USA) The rule is marked 'Brown & Sharpe MFG Co, Providence, RI, USA, Tempered No 4, 300'. The rule is marked out in inches with edge's respectively in 1/8's, 1/16's, 1/32's...
SOLD - Edward Preston Spokeshave - Flat - No. 1390H
planes
- £0.00
Flat soled Edward Preston adjustable spokeshave no. 1390H. Retains its Edward Preston cutter though little life remains, also provided with a new replacement Ray Iles cutter. For general information about this tool see the Preston Spokeshave 1390H Review on FindMyTool.co.uk Condition: all parts...
SOLD - Old Stanley Sliding Bevel No.25
measuring tools
- £0.00
× PLEASE NOTE: We can only accept orders for England, Wales and Scotland on this item. -> More Info An old stanley sliding bevel no. 25 - 7 1/2" with Rosewood stock and brass parts. The stock is marked 'Stanley, Made In England, No 25 - 7 1/2'. Condition: please see phot...
SOLD - 2x Stanley Sliding Bevels No. 5025
measuring tools
- £0.00
2x Stanley Sliding Bevels No. 5025 - 10 1/2" & 7 1/2" For general info about these tools, see the Stanley Sliding Bevel No. 5025 review on FindMyTool.co.uk Condition: please see photos for condition.
SOLD - Old Starrett ZigZag Rule No. 451 - 24" (USA) C.1911
measuring tools
- £0.00
An Old Starrett ZigZag Rule No. 451 - 24" (USA) C.1911. Marked 'Pat Mar 14, 1911, No 451, The LS Starrett Co, Athol, Mass, USA, Tempered'. This old Starret rule is in super condition for its age. This tool came from an old engineer and his father before him, a lot of his tools appear to date to 1...