Sold Items
916 items found in Sold Items
SOLD - Stanley Edge Trimming Plane No. 95
planes
- £0.00
An old Stanley 95 plane with a brass user-made block attachment. This old, increasingly scarce Stanley edge trimming plane was made in USA. This was Stanley's earliest model with the Patent mark. Retains a good length blade marked 'Stanley Rule & Level Co, New Britain Conn USA'. A good clean ...
SOLD - Old Keyzor & Bendon (London) Wooden Rule - 24" (Boxwood)
measuring tools
- £0.00
An old scarce Keyzor & Bendon imperial 24" Folding Rule. This old Keyzor & Bendon rule is marked 'Keyzor & Bendon, London, Best Box'. Condition: please see photos for condition.
SOLD - Small LSS Starrett Combination Square - 15cm (USA)
measuring tools
- £0.00
An old, small Starrett Adjustable Square with metric 15cm rule. The rule is marked 'The LS Starrett Co Co, Athol, Mass, USA, Hardened'. Stock Height: 2 3/4" Condition: all parts working smoothly, bubble intact, please see photos for condition.
SOLD - Record Plough Plane No. 044C
Other Tools
- £0.00
An old Record Plough Plane No. 044C, made in England. Comes with depth stop and 9x Record plough cutters + 4 other cutters which the previous owner had with the plane.. For general information about this model of plane, see the Record 044C plane review on FindMyTool.co.uk Condition: please see p...
SOLD - Wooden Tongue and Groove Plane (Beech)
planes
- £0.00
An old wooden tongue and groove plane. The rear is marked '3/8'. Groove Width: 4.5mm Groove Blade Width: 4mm Tongue Blade Gap Width: 4mm Condition: all parts move freely, please see photos for condition.
SOLD - Record Jack Plane No. 05 1/2 (Beech)
planes
- £0.00
An old Record Jack Plane No. 05 1/2 + additional full Stanley cutter (not shown in photos). For general information about this tool see the Record 05 1/2 Plane Review on FindMyTool.co.uk Condition: all parts move freely, the original cutter is short, please see photos for condition.
SOLD - Old Starrett Dual Scratch Gauge No 429 (USA)
measuring tools
- £0.00
An Old Starrett Dual Marking Gauge / Scratch Gauge No 429. This tool came from an old engineer, a lot of his tools appear to date to 1910's-1930's and have been kept in very good condition. (not 100% on date, I've seen one dated to 1930 - in super condition) Condition: please see photos for cond...
SOLD - Adjustable Square Stock With Angle Attachment
measuring tools
- £0.00
A lovely old adjustable Square Stock with an angle rule attachment. The stock has a bubble. Rule says 'Cutting Angle Of Countersink For Machine Screws' and 'Cutting Angle Of Drill' Stock Height: 88mm (3 1/2") This tool came from an old engineer, a lot of his tools appear to date to 1910's-1930's ...
SOLD - Small Moore & Wright Adjustable Square - 4" + Attachments (UK)
measuring tools
- £0.00
A lovely old little Moore & Wright Adjustable Square + attachments. Rule and angle attachments. Rule is marked out in inches up to 4” long. The stock is marked 'Moore & Wright, England, Sheffield, Hardened No 414'. Stock Height: 62mm This tool came from an old engineer, a lot of his tools...
SOLD - Small Brown & Sharpe Adjustable Square - 2 1/4" + Attachments (USA)
measuring tools
- £0.00
A lovely old little Brown & Sharpe Adjustable Square + attachments. Rules and angle attachment, 2 1/4” long. Rules are marked out in inches up to 2 1/4” long. The stock is marked 'Brown & Sharpe MFG Co, Providence, RI USA, BS Trade Mark, 554, Patent Pending'. Stock Height: 38mm This tool ...
SOLD - Old Small Lufkin Steel Rule No. 2707 - 4" (USA)
measuring tools
- £0.00
An Old Small Lufkin Steel Rule No. 2707 - 4" (USA) Marked 'No 2707, The Lufkin Rule Co, Saginaw, USA'. The rule is marked with a multitude of measurement markings with many different increments including some ultra fine increments. These tools came from an old engineer and his father before him, ...
SOLD - 2x Vandervell & Co Vee Blocks + 1x Clamp (London, UK)
Other Tools
- £0.00
2x Vandervell & Co Vee Blocks + 1x Clamp Marked 'CA Vandervell & Co Ld, London'. Dimension: 1 1/4" (32mm) x 1 1/4" (32mm) x 1 1/4" (32mm) Vandervell seems to be an old tool / parts makers for the motor industry. These tools came from an old engineer and his father before him, nearly all h...
SOLD - Old Starrett Dividers - 6 1/2" (USA)
measuring tools
- £0.00
Old Starrett Dividers - 6 1/2" These dividers have a moveable / removable spike which can be set to a different height or replaced with a pencil. Marked 'The LS Starrett Co, Athol, Mass, USA'. These tools came from an old engineer and his father before him, nearly all his tools have dated to 1910...
SOLD - Old Brown & Sharpe Interchangeable Spring Dividers (USA)
measuring tools
- £0.00
Old Brown & Sharpe Interchangeable Spring Dividers Comes with three sets of tips. These tools came from an old engineer and his father before him, nearly all his tools have dated to 1910's - 1930's (not 100% on date - in super condition) Overall Height Of Tallest: 11 1/2" (depending on tips) ...
SOLD - 2x Old Starrett Spring Dividers 4" - 6" (USA)
measuring tools
- £0.00
2x Old Starrett Spring Dividers - 4" - 6" Marked 'The LS Starrett Co, Athol, Mass, USA'. These tools came from an old engineer and his father before him, nearly all his tools have dated to 1910's - 1930's (not 100% on date - in super condition) Overall Height Of Tallest: 6 3/4" Condition: pleas...
SOLD - 3x Old Stanley Screwdrivers - 1 1/2" - 10" (Beech)
Other Tools
- £0.00
3x Old Stanley Screwdrivers: Stanely Sweetheart Screwdriver - 10" - 'Stanely, SW, Made In USA, Hurwood' - this screwdriver has a very good, clean, complete 'Stanley' marking on the handle which isn't shown in the photos. Stanely Sweetheart Screwdriver No 215 - 4" - 'No 215, Stanely, SW, Made In U...
SOLD - Old Heavy Duty 'Red Devil' Screwdriver No 1418 - 5 1/4" (Beech)
Other Tools
- £0.00
An old, super, heavy duty screwdriver, marked 'Red Devil, No. 1418'. Blade Length (to ferrule): 5 1/4" (7" with ferrule) Tip Width: 16mm (5/8") These tools came from an old engineer and his father before him, nearly all his tools have dated to 1910's - 1930's (I haven't researched the date of t...
SOLD - Old Stanley Level No. 313 - 24" + Brown & Sharpe Rule (USA)
measuring tools
- £0.00
Old Stanley Level No. 313 - 24" (USA) in a fitted wooden box with green baise lining. and Brown & Sharpe Rule - 24" (USA) The rule is marked 'Brown & Sharpe MFG Co, Providence, RI, USA, Tempered No 4, 300'. The rule is marked out in inches with edge's respectively in 1/8's, 1/16's, 1/32's...
SOLD - Edward Preston Spokeshave - Flat - No. 1390H
planes
- £0.00
Flat soled Edward Preston adjustable spokeshave no. 1390H. Retains its Edward Preston cutter though little life remains, also provided with a new replacement Ray Iles cutter. For general information about this tool see the Preston Spokeshave 1390H Review on FindMyTool.co.uk Condition: all parts...
SOLD - Old Stanley Sliding Bevel No.25
measuring tools
- £0.00
× PLEASE NOTE: We can only accept orders for England, Wales and Scotland on this item. -> More Info An old stanley sliding bevel no. 25 - 7 1/2" with Rosewood stock and brass parts. The stock is marked 'Stanley, Made In England, No 25 - 7 1/2'. Condition: please see phot...
SOLD - 2x Stanley Sliding Bevels No. 5025
measuring tools
- £0.00
2x Stanley Sliding Bevels No. 5025 - 10 1/2" & 7 1/2" For general info about these tools, see the Stanley Sliding Bevel No. 5025 review on FindMyTool.co.uk Condition: please see photos for condition.
SOLD - Old Starrett ZigZag Rule No. 451 - 24" (USA) C.1911
measuring tools
- £0.00
An Old Starrett ZigZag Rule No. 451 - 24" (USA) C.1911. Marked 'Pat Mar 14, 1911, No 451, The LS Starrett Co, Athol, Mass, USA, Tempered'. This old Starret rule is in super condition for its age. This tool came from an old engineer and his father before him, a lot of his tools appear to date to 1...
SOLD - Early Stanley Jointer Plane No. 8
planes
- £0.00
× PLEASE NOTE: We can only accept orders for England, Wales and Scotland on this item. -> More Info A good example of an increasingly scarce early low knob Stanley Jointer Plane No. 8. This lovely old Stanley plane has Rosewood handles including a bulbous low front knob. T...
SOLD - Marples Wood Carving Tools Set (Mahogany)
CHISELS
- £0.00
A Marples Wood Carving Tools Set with leather tool roll and Joseph Marples wood carvers mallet. The set includes 8x Marples carving tools. Condition: please see photos for condition.
SOLD - Old Humber Hawk Car Mascot
Other Tools
- £0.00
A 175mm wide bird car bonnet mascot of a hawk (bird of prey). We understand this to be a Humber Hawk car mascot. The previous owner said he took this off his old Humber Hawk when he scrapped it. We think this dates to the 1930's. Condition: please see photos for condition.
SOLD - 2x Old Very Small CAV Small Tools Vices (England)
Other Tools
- £0.00
2x old very small CAV Small Tools vices (England) / engineers vice clamps. Marked 'CAV Small Tools Ltd, England'. Overall Length: 97mm Sole Length: 77mm Condition: all parts move freely, please see photos for condition.
SOLD - 2x Starrett Vee Blocks + 1x Clamp No. 268 (USA)
Other Tools
- £0.00
2x Starrett Vee Blocks + 1x Clamp No. 268 (USA) Marked 'The LS Starrett Co, Athol, Mass, USA No. 268'. Dimension: 2" (51mm) x 1 1/2" (38mm) x 1 1/2" (38mm) Condition: box is tatty, please see photos for condition.
SOLD - Old Starrett Bench Block No. 129 (USA)
Other Tools
- £0.00
Old Starrett Bench Block No. 129 (USA). Marked 'The LS Starrett Co, Athol, Mass, USA, No 129' and 'Pat Jan 16 1923'. These tools came from an old engineer, a lot of his tools appear to date to 1920's-1930's. Overall Diameter: 3" Condition: a few bits of pitting to surface, please see photos for...